Mitsubishi Electronics XD250U-ST Installation, Layout of the projector, Front projection, English

Models: XD250U-ST

1 42
Download 42 pages 47.27 Kb
Page 9
Image 9
Installation

Installation

Layout of the projector

Image size varies depending on the distance between the screen and the projector.

Front projection

W

 

 

 

 

 

L : Between the screen and the front edge of the projector

 

 

 

 

 

 

Hd : Height of the projected image

 

 

 

 

 

 

Screen

 

 

Distance from the screen : L

 

Hd

Diagonal size

 

Width : W

 

Height : H

 

 

 

 

 

 

 

inch

cm

inch

cm

inch

cm

inch

m

inch

cm

40

102

32

81

24

61

22

0.5

3.6

9

60

152

48

122

36

91

33

0.8

5.4

14

80

203

64

163

48

122

44

1.1

7.2

18

100

254

80

203

60

152

55

1.4

9.0

23

150

381

120

305

90

229

83

2.1

13.4

34

200

508

160

406

120

305

111

2.8

17.9

45

250

635

200

508

150

381

139

3.5

22.4

57

300

762

240

610

180

457

167

4.3

26.9

68

The above figures are approximate and may be slightly different from the actual measurements.

ENGLISH

Front projection, ceiling mounting

For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation.

For details, consult your dealer.

The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

When using the projector mounted on the ceiling, set IMAGE REVERSE in the INSTALLATION menu to MIRROR INVERT. See page 21.

When the projector is mounted on the ceiling, images may appear darker than those projected in the case of tabletop mounting. This isn’t a product malfunction.

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please use the screw holes as the illustration shows.

Important:

Screws are not included. Please obtain the appropriate screws for your type of ceiling. (M4 diameter)

It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution.

Rear projection

Ask a specialist for installation. For details, consult your dealer.

For rear projection, set IMAGE REVERSE in the INSTALLATION menu to MIRROR. See page 21.

Caution:

Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the pro- jector to facilitate ventilation.

Place the projector at least 50 cm (or 20 inch) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.

Do not use the projector in the following locations and manners, which may cause fire or electric shock.

In a dusty or humid place.

In a sideways or upside-down position.

Near a heater.

In an oily, smoky, or damp place such as a kitchen.

In direct sunlight.

Where the temperature rises high, such as in a closed car.

Where the temperature is lower than +41°F (or +5°C) or higher than +95°F (or +35°C ).

Important:

Do not apply force to the lens, because the lens may be damaged.

Be sure to use this projector at an altitude of less than 1500 meters.

EN-9

Page 9
Image 9
Mitsubishi Electronics XD250U-ST Layout of the projector, Ceiling Mount Installation, Front projection, English