Mitsubishi Electronics XD250U-ST Network settings, Setting Projector Name, IP Settings, English

Network settings

You can set the network of the projector using the menu.

opt.
NETWORK
PROJECTOR	SET
NAME
NETWORK	OK
PASSWORD
IP CONFIG	OK
PJLink	ON
CERTIFICATION
NETWORK RESET	OK

Setting Projector Name

1.Display the NETWORK menu. (See page 27 for menu setting.)

2. Press the or ! button to select PROJECTOR NAME.

PROJECTOR	SET
NAME

3.Press the ∀ or # button to select SET .

4.Press the ENTER button.

• PROJECTOR NAME screen appears.

4.Press the direction buttons to move the key cursor, select the characters or marks to enter, and press the ENTER button.

•Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.

! key:	Shifting the position of enter cursor to the
	left for each character.
# key:	Shifting the position of enter cursor to the
	right for each character.
DEL key:	Deleting the character in the position of
	enter cursor for each character.

caps/CAPS key: Switching an alphabet character to CAPI-

	TAL or small.
CLEAR key:	Deleting all the entered characters.

•The default password is "admin".

5.Select OK, and NEW NETWORK PASSWORD screen appears if the entered password is correct.

•If the entered password is not correct, CURRENT NET- WORK PASSWORD screen appears again.

ENGLISH

5.Press the direction buttons to move the key cursor, select the characters or marks to enter, and press the ENTER button.

•Projector Name can be set using up to 15 characters includ- ing alphabets (capital/small), numeric characters, or marks.

!∀key:	Shifting the position of enter cursor to the
	left for each character.
# key:	Shifting the position of enter cursor to the
	right for each character.
DEL key:	Deleting the character in the position of
	enter cursor for each character.

caps/CAPS key: Switching an alphabet character to CAPI- TAL or small.

NEXT/PREV key:Switching the marks listed on the fourth

	line.
SPACE key:	Inserting a space in the position of enter
	cursor.
CLEAR key:	Deleting all the entered characters.

6.When selecting OK, the setting is completed as the name stored. However, when selecting CANCEL, the setting is com- pleted without storing.

•The display returns the NETWORK menu after selecting OK or CANCEL.

•It may take some time to reflect the settings.

Network Password Settings

1.Display the NETWORK menu. (See page 27 for menu setting.)

2. Press the or ! button to select NETWORK PASSWORD.

NETWORK	OK
PASSWORD

3.Press the ENTER button.

• CURRENT NETWORK PASSWORD screen appears.

6.Enter the NEW NETWORK PASSWORD and CONFIRM NET-

WORK PASSWORD.

•Password can be set using up to 32 characters including alphabets (capital/small) or numeric characters.

! key:	Shifting the position of enter cursor to the
	left for each character.
# key:	Shifting the position of enter cursor to the
	right for each character.
∃ key:	Shifting the position of enter cursor
	between NEW NETWORK PASSWORD
	and CONFIRM NETWORK PASSWORD.
DEL key:	Deleting the character in the position of
	enter cursor for each character.

caps/CAPS key: Switching an alphabet character to CAPI-

	TAL or small.
CLEAR key:	Deleting all the entered characters.

7.When NEW NETWORK PASSWORD and CONFIRM NET- WORK PASSWORD are matched, the setting is completed after changing the NETWORK PASSWORD.

•If the entered content is not matched, NEW NETWORK PASSWORD screen appears again after an error dialog is displayed.

•It may take some time to reflect the settings.

IP Settings

1.Display the NETWORK menu. (See page 27 for menu setting.)

2. Press the or ! button to select IP CONFIG.

IP CONFIG OK

3.Press the ENTER button.

• IP CONFIG menu appears.

IP CONFIG

DHCP	ON
IP ADDRESS	192.168.0.10
SUBNET MASK	255.255.255.0
DEFAULT	10.132.1.1
GATEWAY
MAC ADDRESS	xx-xx-xx-xx-xx-xx

EN-27