Extron electronic manual 5— The Advanced Settings tab screen, USP 507 • USP 507 Software

Advanced Settings tab

The Advanced Settings tab allows advanced functions to be configured. These include test pattern selection and advanced features, used primarily during initial setup.

Figure 5-5 — The Advanced Settings tab screen

•Test Pattern — Select any of the 14 test patterns to aid setting up an output display device. A small thumbnail of the pattern is shown on the tab (see above). Select Off where a test pattern is not needed.

•Advanced Features — Within this section:

RGB delay can be adjusted (from 0 to 5.0 seconds) in 0.1 second intervals with each click of the scroll arrows.

A choice of three switch effects is available:

Cut (Blank) - image cuts to a black screen to mask the input switch, Cut (Freeze) - image freezes to mask the input switch,

Fade - image fades out and the new input fades in. Auto memory can be turned on or off.

If using MTP twisted pair devices, pre-peaking can be turned on to compensate for long cable runs.

•Clock — In this section the clock display mode can be set or disabled, and the on-screen horizontal and vertical position for the clock location can be adjusted.

USP 507 • USP 507 Software 5-11