Extron electronic USP 507 Scaler Settings page, 5 — Scaler settings page, Input configuration

Scaler Settings page

Access the Scaler Settings page (figure 6-5) by clicking the Scaler Settings link on the sidebar menu on the Configuration page.

Figure 6–5 — Scaler settings page

The Scaler Status page displays input configuration settings (input signal format, Auto-Image and film mode status) and output configuration settings (resolution and refresh rates, output sync format, and polarity), and advanced configuration settings (RGB delay, test pattern selection, auto memory status, switch effect, and MTP pre-peaking setting, and EDID resolution and refresh rates). Any settings can be changed and the unit updated to the new settings. The page updates itself periodically to reflect the latest status of the USP 507 components. If a variable changes, the display shows the change in status the next time it updates.

Input configuration

For each of the seven inputs, the input format can be changed by clicking on the drop-down arrow and selecting the appropriate signal type:

NSelecting Auto Detect allows the device to automatically set the input to the appropriate signal format.

•Input 1: RGB, YUVp/HDTV, Auto Detect

Input 2: RGB, YUVp/HDTV, Auto Detect

Input 3: RGB, YUVp/HDTV, RGBcvS, YUVi, S-video, composite, Auto Detect

Input 4: YUVi, S-video, composite, Auto Detect

Input 5: S-video, composite, Auto Detect

Input 6: DVI

Input 7: SDI, HD-SDI, Auto Detect

For each input Auto-Image can be set on or off.

For each of the inputs Film mode can be enabled or disabled.

NFilm mode processing helps maximize image detail and sharpness for NTSC, PAL, and HDTV 1080i sources that originated from film.

USP 507 • HTML Operation 6-7