Extron electronic USP 507 manual Image capture/recall, To capture an image, To recall an image

Image capture/recall

Within this menu, the currently displayed image can be captured and saved to the USP 507 memory. This image or any other saved image can then be recalled and output to the active display at a later time. The recalled image can be displayed at the front of or behind an active video signal.

To capture an image:

1. Press Next to enter the save menu, the LCD displays “Save Image: <N/A>”.

Use either Adjust knob to scroll through 16 image names, (IMG01.bmp through IMG16.bmp) to select a suitable name.

NWhen saving an image to a selected name, any image previously saved with that selected name is overwritten in favor of the newly saved image.

2. When the desired image name is reached, press Next. The LCD displays “[Detail] to Confirm”, and the Detail button flashes red.

3.Press the detail button, the LCD changes to “Saving Image Please wait”. The display then changes to “Saving Image” and a progress bar begins showing the progress of the image capture process. When the image is saved the LCD reverts to the default menu cycle.

NCustom image names can be used when image captures are initiated using the appropriate SIS commands.

Step 1

MENU

Press NEXT

Rotate either adjust knob.

Step 2

MENU

Press NEXT

Step 3

Press DETAIL

LCD screen displays

Save Image:

<N/A>

ADJUST LCD screen displays

Save Image:

IMG05.BMP

LCD screen displays

[Detail] = Confirm

IMG05.BMP

LCD screen displays

Saving Image

Please wait

DETAIL

ZOOM/

PAN

Detail button flashes red

ZOOM/	then
PAN	Saving Image 54%

To recall an image:

1. Press Next twice to enter the first recall menu. The LCD displays “Recall to Back: <N/A>”. To recall an image to the front of an active signal, press Next again, and the LCD displays “Recall to Front: <N/A>”.

In either submenu (Recall to Back or Recall to Front), use either Adjust knob to scroll through the saved images, to the desired image.

2.Press Next to recall the image. The LCD displays “Recalling Image Please wait” while the image is downloaded to the display. When the image is fully downloaded, the LCD displays the name of the image and “Recalled”, (for example, “IMG05.bmp Recalled”). The recalled image is displayed on the active display. Press Next to exit the Recall Image menu.

USP 507 • Front Panel Operation 3-9