Extron electronic manual Control Pages, 11 - User Control page, USP 507 • HTML Operation

Models: USP 507

1 96
Download 96 pages 45.48 Kb
Page 82
Image 82
Control Pages

Control Pages

These three Control pages (User Control, Memory/Input Presets, and PIP Setup/ PIP Presets) allow limited device configuration. From the User Control page, the selection and viewing of inputs, mute and freeze selection, and execution of Auto- Image is possible. Picture control and input sampling is also available on the User Control page. From the Memory/Input Presets page, up to 16 memory presets and up to 128 input presets can be saved and recalled. Using the PIP Setup/PIP Presets page an input can be selected and swapped to become either the main image or the secondary (PIP) image. In addition, the PIP can be turned off and Auto-Image can be performed an either input. Within PIP Setup limited picture control is possible. The Control pages initially open on the User Control page.

User Control page

The User Control page emulates some of the front panel features and displays the current picture control settings and input sampling data (see figure 6-11).

In addition, image muting/unmuting, freezing/unfreezing and Auto-Image can be selected.

Figure 6–11 User Control page

To select an input to be displayed, click on an input number. The selected input is displayed.

To mute or unmute, freeze or unfreeze the input image, click on the appropriate button. Muting the image blanks the display screen. Unmuting the image allows the image to be displayed.

Freezing the image keeps the same image displayed, even when the input is switched. Unfreezing the image allows images from switched inputs to be viewed.

Select Auto-Image to initiate an Auto-Image on the selected input.

For picture control, select and change the criteria in this section as desired.

The input sampling section allows adjustment to specific image settings (horizontal and vertical start, pixel phase, total pixels active pixels, and active lines). To view or adjust these, an active signal must be present and PIP must be turned off.

USP 507 • HTML Operation 6-13

Page 82
Image 82
Extron electronic manual Control Pages, 11 - User Control page, USP 507 • HTML Operation