Extron electronic USP 507 manual SIS Programmer’s Guide, cont’d, E X1&HSIZ

SIS Programmer’s Guide, cont’d

Command	ASCII command	Response	Additional description
	(host to processor\⤀	(processor to host\⤀

Horizontal size

Specify a value	E X1&HSIZ}	HsizX!*X1&]
Increment value	E+HSIZ}	HsizX!*X1&]
Decrement value	E-HSIZ}	HsizX!*X1&]
View value	EHSIZ}	X1&]

Set horizontal size to X1&. Widen the image.

Make image narrower. Show horizontal size value.

Vertical size

Specify a value	E X1&VSIZ}	VsizX!*X1&]
Increment value	E+VSIZ}	VsizX!*X1&]
Decrement value	E-VSIZ}	VsizX!*X1&]
View value	EVSIZ}	X1&]

Set vertical size to X1&. Make the image taller. Make image shorter.

Show vertical size value.

View window details

Main window	E1XY}	Wxy1,*X1^*X1^*X1&*X1&]	View position and size of main
			window.
PIP window	E2XY}	Wxy2,*X1^*X1^*X1&*X1&]	View position and size of PIP
			window.

NThe format of the response is: X-position x Y-position x X-size x Y-size.

Zoom

Specify a value	E X1*ZOOM}	ZoomX!*X1*]
Increment value	E+ZOOM}	ZoomX!*X1*]
Decrement value	E-ZOOM}	ZoomX!*X1*]
View value	EZOOM}	X1*]

Set zoom percentage to X1*. Zoom in.

Zoom out.

Show zoom percentage.

Pan

Specify a horizontal value	E X1(HPAN}	HpanX!*X1(]
Pan left	E+HPAN}	HpanX!*X1(]
Pan right	E-HPAN}	HpanX!*X1(]
Specify a vertical value	E X1(VPAN}	VpanX!*X1(]
Pan down	E+VPAN}	VpanX!*X1(]
Pan up	E-VPAN}	VpanX!*X1(]

Set horizontal pan value to X1(. Pan left.

Pan right.

Set vertical pan value to X1(. Pan down.

Pan up.

N X! = Input selection 1 – 7

X1^ = H and V position (zero location is 2048, and limits are ± the output resolution) X1& = H and V size (0 to 200% of the output area in single pixel increments)

X1* = Zoom: 100 to 500%, (default for low resolution video = 111%, default for high resolution video = 100%)

X1( = Pan: 0 to 200 (default = 100 center point)

4-10 USP 507 • SIS Programmer’s Guide