Extron electronic USP 507 Software, cont’d, Control program menus, File menu, Options menu

USP 507 Software, cont’d

Control program menus

File menu

Click on this to open a drop-down menu displaying six selectable options: Connect, Disconnect,

Save Configuration..., Restore Configuration..., File Manager, and Exit.

•Connect — Select this to reconnect the USP 507 (or connect a new device) when it has been disconnected

from the Signal Processing Products Control Program. Then follow the steps for “Starting the program” on page 5-2.

•Disconnect — Select this to disconnect the unit from the Signal Processing Products Control Program. The SPPCP remains open, but items on the main window are grayed out and configuration via the SPPCP is not available.

•Save Configuration... — Select this to save the current configuration.

A secondary window opens allowing choice of items to save, and selecting a folder location for the saved xxx.cfg files.

NIf these files are saved to the root directory of the USP 507, they are accessible at a later time.

•Restore Configuration... — Select this to restore a saved configuration.

A secondary window opens allowing a choice of which folder to restore the files from. A pop-up confirmation window opens allowing the action to be completed or cancelled.

•File Manager — Select this to load the Extron IP Link® File Manager application. This application is useful in uploading and downloading files to and from

IP Link-enabled devices.

NThis option becomes enabled when the File menu is accessed after installing File Manager. In order to use this option, download the IP Link File Manager application at www.extron.com.

•Exit — Select this to exit the Control Program. This disconnects and closes the Signal Processing Products Control Program application.

Options menu

Click on this to open a drop-down menu displaying two selectable options: Show Splash Screen, and Display Errors on Status Bar.

•Show Splash Screen — Select this to show the Extron Signal Processing Products Control Program splash screen upon startup. Deselected, the program opens immediately at the Select Connection Type window.

•Display Errors on Status Bar — Select this to display any operation errors on the status bar at the bottom of the window

5-4 USP 507 • USP 507 Software