Extron electronic USP 507 manual Command/Response Table for IP SIS Commands

USP 507 • SIS Programmer’s Guide 4-17

Command/Response Table for IP SIS Commands

Command	ASCII ⤀(Telnet\	URL Encoded ⤀(Web\	Response	Additional
	(host to ⤀processor\	(host to ⤀processor\	(processor to ⤀host\	description
IP control ports commands
Set processor name	EX10)CN}	WX10)CN	Ipn•X10)]
Read processor name	ECN}	WCN	X7)]
Reset processor name to factory	E•CN}	W•CN	Ipn•X10)]
default
Set time and date	EX10@CT}	WX10@CT	IptX10@]
Read time and date	ECT}	WCT	X10#]
Set GMT offset	EX10$CZ}	WX10$CZ	IpzX10$]
View GMT offset	ECZ}	WCZ	X10$]
Set Daylight Saving Time	EX10%CX}	WX10%CX	IpxX10%]
Read Daylight Saving Time	ECX}	WCX	X10%]
Set IP address	EX10^CI}	WX10^CI	IpiX10^]
Read IP address	ECI}	WCI	X10^]
Read hardware address	ECH}	WCH	X10&]
Read number of open	ECC}	WCC	X10*]
connections
Set subnet mask	EX10^CS}	WX10^CS	IpsX10^]
Read subnet mask	ECS}	WCS	X10^]
Set gateway IP address	EX10^CG}	WX10^CG	IpgX10^]
Read gateway IP address	ECG}	WCG	X10^]
Set administrator password	EX10(CA}	WX10(CA	Ipa•X10(]
Read administrator password	ECA}	WCA	X10(]
Reset (clear) administrator	E•CA}	W•CA	Ipa•]
password
Set user password	EX10(CU}	WX10(CU	Ipu•X10(]
Read user password	ECU}	WCU	X10(]
Reset (clear) user password	E•CU}	W•CU	Ipu•]
Set DHCP on or off	EX11^DH}	WX11^DH	IdhX11^]
Read DHCP on/off status	EDH}	WDH	X11^]
N X10) = Switcher name (up to 240 alphanumeric characters)		N The following characters are invalid in the name:
X10@ = Time and date (MM/DD/YY• HH:MM:SS)			{space} ~ , _ @ = ` [ ] { } < > ‘ “ ; : \ and ?.

X10$ = GMT offset

X10% = Daylight Savings Time

X10^ = IP address

X10& = Hardware (MAC) address: ##-##-##-##-##-##

X10* = Number of open connections: 0 - 255

X10( = Password (12 alphanumeric characters)

X11^ = DHCP, 0 = off, 1 = on