Extron electronic USP 507 Front Panel Operation, Front Panel Overview, 1— Front panel features

Front Panel Operation

Front Panel Overview

INPUTS	AUTO		BRIGHT	DETAIL
MUTE		SIZE
	IMAGE		/CONT

1	2	3	4	5	6	7			COLOR	ZOOM
						FREEZE	PIP	POSITION
							PRESET		/TINT	/PAN
1			2				3		4	5

Figure 3-1 — Front panel features

MENU

NEXT

6

ADJUST

USP 507

UNIVERSL SIGNAL PROCESSOR

7

aFront panel configuration port — Connect a control system or computer to this (RS-232) port, using an optional 9-pin D to 2.5 mm mini jack TRS RS-232 cable, part 70-335-01(see below). RS-232 protocol (default values):

• 9600 baud • 1 stop bit • no parity • 8 data bits • no flow control

			6 feet
1		6
5		9
					Tip
					Ring
	9-pin D		Connection	TRS Plug	Sleeve (Gnd)
	Pin 2		Computer's RX line	Tip
	Pin 3		Computer's TX line	Ring
	Pin 5	Computer's signal ground		Sleeve

Figure 3-2 — Front 2.5 mm port configuration cable, part 70-335-01

bInput selection buttons — Select/switch inputs and indicate which input is active.

cSpecial function buttons — These four buttons are:

•Mute — Allows the current displayed image to be muted or unmuted.

•Freeze — Allows the current displayed image to be frozen or unfrozen as desired.

•Auto Image— Initiates auto image adjustment on the selected input.

•PIP Preset — Allows the current PIP layout to be saved as a preset, or recalls a saved PIP preset layout.

dPicture control buttons — These six buttons are:

•Size — Allows adjustment to the displayed image size. Also used (when held down with Position button) to enable or disable front panel locking.

•Position — Allows horizontal and/or vertical position adjustment of the displayed image. Also used (when held down with Size button) to enable or disable front panel locking.

•Bright/Cont — Allows adjustment of the brightness and contrast settings for the displayed image.

•Color/Tint — Allows adjustment of the color and tint settings for the displayed image.

•Detail — Allows adjustment of the detail (sharpness) settings for the displayed image. Also used when saving an image for recall.

•Zoom/Pan — Allows displayed image to be zoomed in or out, or panned horizontally and/or vertically.

NAdjustments are made using either or both Adjust knobs.

eLCD display — This LCD screen displays two rows of menu, control response, and configuration text.

3-2 USP 507 • Front Panel Operation