Extron electronic USP 507 manual Firmware Upgrade page, HTML Operation, cont’d

HTML Operation, cont’d

Firmware Upgrade page

The Firmware Upgrade page (figure 6-8) provides a way to replace the firmware that is coded on the USP 507’s control board without needing to take the device out of service.

Figure 6–8 — Firmware Upgrade page

NThe Firmware Upgrade page is only for replacing the firmware that controls all the device operation. To insert your own HTML pages, see File Management Page, later in this chapter.

Update the USP 507 firmware as follows:

1.	Visit the Extron Web site, www.extron.com, and download the latest firmware
	file to your computer.
	a.	On the Extron Web page, select the Downloads tab.
	b.	On the Download Center page, click the Firmware link on the left sidebar
		menu.
	c.	Click on the USP 507 name.
	d.	On the next screen, fill in the required information, then click the
		Download product name_firmware version.exe button.
	e.	On the File Download - Security Warning window, click Save.
	f.	On the Save As window, browse to the folder where you want to save
		the firmware file, and click Save. The firmware installation (.exe) file is
		placed on your hard drive.
	g.	Run the .exe file. This opens the Firmware Update program, creating a
		product named folder within which is placed the firmware file (x.S19).
2.	Access the USP 507 internal Web pages.
3.	Select the Configuration tab.
4.	On the Configuration page, click the Firmware Upgrade link on the left
	sidebar menu.
5.	Click Browse. A Choose File To Upload window opens.
6.	Navigate to the folder (created in step 1g) where the firmware upgrade file is
	saved. Select the file.

6-10 USP 507• HTML Operation