Extron electronic USP 507 manual Command Response Table for SIS Commands

Command Response Table for SIS Commands

Command	ASCII command	Response	Additional description
	(host to processor)	(processor to host)
Input Switching and Configuration
Input selection
Select input	X! !	InX!]	Select video from input X!.
View current input	!	X!]	View currently selected input
			source.

Input video format

Set format	X!*X#\	TypX!*X#]
View format	X!\	X#]
View detected format	X!*\	AtypX!*X#]

Set input X! to video format

X#.

View video format of input X!. View actual video format auto detected on input X!.

Input EDID

Specify an EDID value	E X2!*X2@EDID}	EdidX2!*X2@]	Set EDID resolution and refresh
			for DVI and VGA inputs.
View EDID value	EEDID}	X2!*X2@]	View EDID resolution and
			refresh for DVI and VGA
			inputs.

NDefault is to match output: X2!=0 X2@=0

Auto image

Enable auto image	X!*1A	ImgX!*1]
Disable auto image	X!*0A	ImgX!*0]
Execute auto image	A	Img]

Auto image input X! when selected.

Turn off auto image for input

X!.

Execute auto image for current input.

View auto image	X!A		X1)]	View auto image setting.
Horizontal start
Specify a value	E X$HSRT}		HsrtX!*X$]	Set horizontal location of first
				active pixel in active input.
Increment value	E+HSRT}		HsrtX!*X$]	Increase value.
Decrement value	E-HSRT}		HsrtX!*X$]	Decrease value.
View value	EHSRT}		X$]	Show horizontal location of
				first active pixel in active input.
Vertical start
Specify a value	E X$VSRT}		VsrtX!*X$]	Set vertical location of first
				active pixel in active input.
Increment value	E+VSRT}		VsrtX!*X$]	Increase value.
Decrement value	E-VSRT}		VsrtX!*X$]	Decrease value.
View value	EVSRT}		X$]	Show vertical location of first
				active pixel in active input.
N X! = Input selection		1 – 7
X# = Input video format		1 = RGB (default), 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video,
X$ = H/V start		6 = composite video, 7 = SDI, 8 = HD-SDI, 9 = DVI, 10 = auto detect
		0 to 255 (default midpoint = 128)
X1) = Off/disable/none (0), on/enable (1)
X2! = Scaler resolution		1 = 640 x 480, 2 = 800 x 600, 3 = 852 x 480, 4 = 1024 x 768, 5 = 1024 x 852,
		6 = 1024 x 1024, 7 = 1280 x 768, 8 = 1280 x 800, 9 = 1280 x 1024, 10 = 1360 x 765,
		11 = 1360 x 768, 12 = 1365 x 768, 13 = 1366 x 768, 14 = 1365 x 1024, 15 = 1440 x 900,
		16 = 1400 x 1050, 17 = 1680 x 1050, 18 = 1600 x 1200, 19 = 1920 x 1200, 20 = 480p,
X2@ = Output refresh rate		21 = 576p, 22 = 720p, 23 = 1080i, 24 = 1080p, 25 = 2048 x 1080,
		1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz. 7 = 59.94 Hz,
		8 = 60 Hz (default), 9 = 75 Hz
			USP 507 • SIS Programmer’s Guide		4-7