Extron electronic USP 507 manual Symbol definitions, = Secam

Symbol definitions

]= Carriage return with line feed

¦or } = Carriage return with no line feed

• = Space

E or W = Escape key X! = Input selection, 1 to 7

X# = Input video format:

1 = RGB (default)

2 = YUVp/HDTV

3 = RGBcvS

4 = YUVi

5 = S-video

6 = Composite video

7 = SDI

8 = HD-SDI

9 = DVI

10 = Auto detect

X$ = H/V start — 0 to 255 (default midpoint = 128) X^ = Pixel phase — 0 to 31 (default = 16)

X& = Total pixels — (±512 of the default value) X* = Active pixels — (±512 of the default value) X( = Active lines — (±512 of the default value)

X1) = Off/disable/none (0) or on/enable/black (1)

X1! = Input standard:

0 = No signal

1 = NTSC

2 = PAL

4 = SECAM

-= N/A (occurs when input is set to a high resolution signal format) X1@ = Internal temperature (in degrees Celsius)

X1# = Horizontal and vertical frequencies (format is three digit with single decimal and leading zeros, such as, 075.3)

X1% = Picture adjustment — 0 to 127 (default 64)

X1^ = H and V position (zero location is 2048, and limits are ± the output resolution) X1& = H and V size (0 to 200% of the output area, in single pixel increments)

X1* = Zoom (100 to 500%)

Default for low resolution video = 111% Default for high resolution video = 100%

X1( = Pan — 0 to 200 (default = 100 center point)
X2) = Test patterns:
0	= Off (default)	8 = Crop
1	= Color bars	9 = 1.33 Aspect ratio
2	= Crosshatch	10	= 1.78 Aspect ratio
3	= 4x4 Crosshatch	11 = 1.85 Aspect ratio
4	= Grayscale	12	= 2.35 Aspect ratio
5	= Ramp	13	= Safe area
6	= Alternating pixels	14	= Blue mode
7	= White field
		USP 507 • SIS Programmer’s Guide		4-5