Extron electronic USP 507 manual SIS Programmer’s Guide, cont’d, ESX1&HSIZ

SIS Programmer’s Guide, cont’d

Command	ASCII command	Response	Additional description
	(host to processor\⤀	(processor to host\⤀

Scan converter horizontal size

Specific value	ESX1&HSIZ}	HsizSX1&]
Increase size	ES+HSIZ}	HsizSX1&]
Decrease size	ES-HSIZ}	HsizSX1&]
View	ESHSIZ}	X1&]

Set horizontal size to X1&. Widen image.

Make image narrower. Horizontal size is X1&.

Scan converter vertical size

Specific value	ESX1&VSIZ}	VsizSX1&]
Increase size	ES+VSIZ}	VsizSX1&]
Decrease size	ES-VSIZ}	VsizSX1&]
View	ESVSIZ}	X1&]

Set vertical size to X1&. Make image taller. Make image shorter. Vertical size is X1&.

Scan converter horizontal filter

Set detail level	ESX7&HDET}	HdetSX7&]
Increment up	ES+HDET}	HdetSX7&]
Increment down	ES-HDET}	HdetSX7&]
View detail value	ESHDET}	X7&]

Set H filter level to X7&. Increase H filter level. Decrease H filter level. H filter level is X7&.

Scan converter flicker filter

Set flicker filter level	ESX7&VDET}	VdetSX7&]	Specify the flicker filter level
			to X7&.
Increment up	ES+VDET}	VdetSX7&]	Increase the flicker filter level.
Increment down	ES-VDET}	VdetSX7&]	Decrease the flicker filter level.
View flicker filter level	ESVDET}	X7&]	View the flicker filter level.
Scan converter encoder filter
Set encoder filter level	ESX7&VENC}	VencSX7&]	Set video encoder filter level
			to X7&.
View	EVENC}	X7&]	View the encoder filter level.
Presets
User presets
Recall presets	1*X2%.	1RprX2%]	Recalls user preset X2% for
			selected input.
Save presets	1*X2%,	1SprX2%]	Saves user preset X2% for
			selected input.
Input presets
Recall presets	2*X2^.	2RprX2^]	Recalls input preset X2^.
Save presets	2*X2^,	2SprX2^]	Saves input parameters to
			preset X2^.
PIP presets
Recall presets	3*X2%.	3RprX2%]	Recalls PIP preset X2%.
Save presets	3*X2%,	3SprX2%]	Saves PIP layout to preset X2%.

NX1&X2% X2^ X7&

= H and V size: 0 to 200% of the output area in single pixel increments

= Memory/PIP presets	1 to 16
= Input presets	1 to 128
= Filter level	0 to 3

4-12 USP 507 • SIS Programmer’s Guide