Menu operation (continued)
Basic operation
Several settings can be adjusted using the menu. OFF. Example : Auto power off time setting
1.Press the MENU button.
4.Press the S or T button to select AUTO POWER OFF.
|
| AUTO POWER | OFF |
|
| ON | |
|
| AUTO POWER | OFF |
|
| OFF | |
|
|
|
|
opt.
IMAGE
XGA60
5.Press the W or X button to adjust the auto power off time.
|
| AUTO POWER | OFF |
|
| ON | |
|
| AUTO POWER | 30 min |
|
| OFF | |
|
|
|
|
2.Press the W or X button to select INSTALLATION.
opt.
XGA60
INSTALLATION
3.Press the ENTER button (or T button).
opt.
XGA60
INSTALLATION
AUTO POWER | OFF | |
ON | ||
|
|
| AUTO POWER | OFF |
|
| OFF |
6.Exit the menu by pressing the MENU button several times.
Important:
•When the button doesn’t function, unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again.
•After selecting the items marked with 
, press the ENTER but- ton.
1 IMAGE
CONTRAST | Use to adjust the image contrast. The contrast becomes |
| higher as the value increases. |
BRIGHTNESS | Use to adjust the image brightness. The image becomes |
| brighter as the value increases. |
opt.
IMAGE
XGA60
WHITE ENHANCE | Use to adjust the white level of the projected image. |
| Select AUTO for normal use. |
COLOR TEMP | Use to adjust the color temperature. See page 21. |
COLOR | Use to adjust the color intensity of the image. |
TINT | Use to adjust the color balance of the image. The color |
| balance shifts to green as the value increases and shifts |
| to purple as the value decreases. (Available only when |
| VIDEO or |
| • When the TV50 (PAL, SECAM) signal is input, TINT |
| can’t be adjusted. |
|
| CONTRAST | 0 |
|
|
|
|
|
| BRIGHTNESS | 0 |
|
|
|
|
|
| WHITE ENHANCE | AUTO |
|
|
|
|
|
| COLOR TEMP. | STANDARD |
|
|
|
|
|
| COLOR | 0 |
|
|
|
|
|
| TINT | 0 |
|
|
|
|
|
| SHARPNESS | 0 |
|
|
|
|
|
| GAMMA MODE | AUTO |
|
|
|
|
SHARPNESS | Use to adjust the image sharpness. The image becomes sharp as the value increases. (Not available |
| with certain signals.) |
GAMMA MODE | When AUTO is selected, the appropriate gamma mode is automatically selected depending on the |
| input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STAN- |
| DARD for sport scenes and video sources. Select THEATER for film sources. |
2 INSTALLATION
AUTO POWER ON | When ON is chosen, the lamp is automatically lit when |
| the power cord is plugged in the wall outlet. Choose ON |
| when using the projector mounted on the ceiling. |
| • The projector is in the |
| is off. Use the remote control to turn on the lamp. |
AUTO POWER OFF | Use to set the time elapsed before the projector enters |
| the |
| source. |
SPLASH SCREEN | Choose ON to display the splash screen when the power |
| is turned on. |
opt. | XGA60 | |
| ||
INSTALLATION |
| |
AUTO POWER | OFF | |
ON | ||
| ||
AUTO POWER | OFF | |
OFF | ||
| ||
ON SPLASH | ON | |
SCREEN | ||
| ||
BACK COLOR | BLUE | |
LAMP MODE | STANDARD | |
IMAGE | OFF | |
REVERSE | ||
|
BACK COLOR | Use to select the background from among BLUE and |
| BLACK, which will be displayed when there is no signal input from the source. |
LAMP MODE | Use to change the brightness of the lamp. When LOW is chosen, the lamp brightness is kept low and |
| the projector operating noise is reduced, resulting in a longer lamp replacement interval. |
| • When the lamp mode is switched, the projected image may flicker. This is not a product malfunc- |
| tion. |
| • Do not change the setting of LAMP MODE frequently. |
| • When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW |
| about one minute after |
IMAGE REVERSE | Use to reverse the projected image. Select MIRROR for rear projection with the |
| projector. Select MIRROR INVERT for front projection with the |
