06Preparation
Installing the Media Receiver
Plasma Display
Media Receiver
(vertical installation)
(horizontal installation)
System cable (approx. 3 m/9.8 feet)
•Do not place a VCR or any other device on the top of the Media Receiver.
•When installing, allow enough space on the sides and above the Media Receiver.
•Do not block the side cooling vents or the rear ventila- tion fan opening of the Media Receiver.
Over 5 cm |
(2 inches) |
Over 5 cm | Over 5 cm |
(2 inches) | (2 inches) |
Over 10 cm (3 15/16 inches)
Installing the Media Receiver vertically
You can use the supplied stand to install the Media Receiver vertically.
1.Insert the stand into the side of the Media Receiver.
Right side
2.Secure the stand with the supplied screws.
Screws
Over 5 cm (2 inches)
Over 5 cm | Over 5 cm |
(2 inches) | (2 inches) |
16
Over 10 cm (3 15/16 inches)
En
