Press HOME MENU to exit the menu.
4
Auto Setup Manual Setup
• Auto Setup starts.
• To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A confirmation screen appears. Press / to select “Yes”, and then press ENTER.
Option
Select “Auto Setup”. ( / then ENTER)
6 Press HOME MENU to exit the menu.
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3
• Use / only when you adjust the vertical position after selecting “H/V Position Adjust”.
Use Auto Setup to automatically adjust positions and clock of images coming from a personal computer.
5 Perform adjustment. ( / and / )
Adjusting image positions and clock automatically (PC mode only)
Phase Reset
0
• Adjustments are stored separately according to input source.
Clock
0
H/V Position Adjust
• To restore the factory defaults for all the items, press / to select “Reset” in step 4, and then press ENTER. A confirmation screen appears. Press / to select “Yes”, and then press ENTER.
Manual Setup
Select an item to be adjusted. ( / then ENTER)
6
Adjust the vertical position ( / ) or horizontal position ( / ).
Press HOME MENU to exit the menu.
5
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “Manual Setup”. ( / then ENTER)
4
H/V Position Adjust Reset
Usually you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimize the positions and clock of images when necessary.
Position
• Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again.
• Be sure to connect the computer to the Media Receiver and switch it on before starting Auto Setup.
Adjusting image positions and clock manually (PC mode only)
Adjust the horizontal and vertical positions of images on the Plasma Display.
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “Position”. ( / then ENTER)
4 Select “H/V Position Adjust”. ( / then ENTER)
• When Auto Setup is finished, “Auto Setup completed.” appears.
• Even when “Auto Setup completed.” appears, Auto Setup may have failed, depending on conditions.
Adjustments and Settings
Adjusting image positions (AV mode only)
10
English
45
En
