Preparation
Installing the Plasma Display
Over 50 cm (19 11/16 inches)
Over 10
cm (3 15/16 inches )
Using the optional PIONEER stand
For details on installation, refer to the instruction manual supplied with the stand.
•This product may be used only with model
Using the optional PIONEER speakers
For details on installation, refer to the instruction manual supplied with the speaker.
Operating Environment
Operating environment temperature and humidity: +0°C to +40°C (+32°F to +104°F); less than 85% RH (cooling vents not blocked)
Avoid installing at the following locations:
•Under direct exposure to sunlight
•Under strong artificial light
•In high humidity
•Poorly ventilated
06
English
Locating
•Avoid direct sunlight. Maintain adequate ventilation.
•The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (9.8 feet).
•Because the Plasma Display is heavy, be sure to have someone help you when moving it.
•If you place anything on the top of the Media Receiver it will not receive enough ventilation and will not operate properly.
•Allow enough space around the upper and back parts when installing to ensure ventilation around the backside.
15
En
