Enjoying through External Equipment | 12 |
Using HDMI Input
The INPUT 1 and INPUT 3 terminals include HDMI terminals to which digital video and audio signals can be input. To use the HDMI terminal, activate the terminal and specify the types of video and audio signals to be received from the connected equipment. For the types of these signals, see the operation manual that came with the connected equipment.
Before starting the menu, press INPUT 1 (or INPUT 3) on the remote control unit or press INPUT on the Plasma Display to select INPUT 1 (or INPUT 3).
Input signal correlation table
1920∗1080i@59.94/60Hz
720∗480p@59.94/60Hz
1280∗720p@59.94/60Hz
720(1440)∗480i@59.94/60Hz
• PC signals are not supported.
Connecting HDMI equipment
Media Receiver (rear view)
DIGITAL OUT
OPTICAL
(TS) | S400 |
|
|
|
|
VIDEO | INPUT 1 | COMPONENT VIDEO |
| ||
Y | CB/PB | CR/PR |
| ||
|
|
|
| INPUT 1 | INPUT 3 |
IINPUT 33 | Y | CB/PB | CR/PR | HDMI | |
HDMI cable
(commercially available)
Audio cable (commercially available) Make this connection when inputting analog audio signals.
HDMI equipment
To activate the HDMI terminal:
1 | Press HOME MENU. |
| English | ||
2 | Select “Option”. ( | / | then ENTER) | ||
| |||||
3 | Select “HDMI Input”. ( | / then ENTER) |
| ||
4 | Select “Setting”. ( | / | then ENTER) |
| |
5 | Select “Enable”. ( | / | then ENTER) |
| |
Item | Description |
Disable | Deactivates the HDMI terminal. |
(factory default) |
|
|
|
Enable | Activates the HDMI terminal. |
|
|
6Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1Press HOME MENU.
2 Select “Option”. (
/
then ENTER)
3 Select “HDMI Input”. (
/
then ENTER)
4 Select “Video”. (
/
then ENTER)
5 Select the type of digital video signals. (
/
then
ENTER)
•If you select “Auto”, an attempt will be made to identify the type of digital video signals when digital video signals are received.
Item | Description |
Auto | Automatically identifies input digital video |
(factory default) signals. | |
|
|
Digital Component Video signals (4:2:2) | |
| locked |
|
|
Digital Component Video signals (4:4:4) | |
| locked |
|
|
| Digital RGB signals locked |
|
|
6Press HOME MENU to exit the menu.
•If you select a parameter other than “Auto”, make such a setting that results in natural color.
•If no image appears, specify another digital video signal type.
•For the digital video signal types to be specified, check the operation manual that came with the connected equipment.
To specify the type of audio signals:
1Press HOME MENU.
2 Select “Option”. (
/
then ENTER)
3 Select “HDMI Input”. (
/
then ENTER)
4 Select “Audio”. (
/
then ENTER)
5 Select the type of audio signals. (
/
then ENTER)
•If you select “Auto”, an attempt will be made to identify the type of audio signals when audio signals are received.
51
En
