Performance Data Sheet

SmartWater Filtration System

GSWF Cartridge

This system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below.

The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.*

(100% safety factors built in for unmetered usage)

Standard No. 42: Aesthetic Effects

Parameter

USEPA

Influent

Influent Challenge

Effluent

% Reduction

Min. Required

 

MCL

Average

Concentration

Average

Maximum

Average

Minimum

Reduction

Chlorine

1.845 mg/L

2.0 mg/L+10%

< 0.05 mg/L

0.05 mg/L

> 97.29%

96.43%

> 50%

T & O

Particulate**

143,333 #/mL

at least 10,000 particles/mL

29.83 #/mL

140 #/mL

99.98%

99.91%

> 85%

Standard No. 53: Health Effects

Parameter

USEPA

Influent

Influent Challenge

Effluent

% Reduction

Min. Required

 

MCL

Average

Concentration

Average

Maximum

Average

Minimum

Reduction

Turbidity

1 NTU***

10.3 NTU***

1+1 NTU***

0.106 NTU

0.14 NTU

98.97%

98.61%

0.5 NTU

Cysts

99.95% Reduction

200,000 #/L

Minimum 50,000 L

0

0

> 99.99%

> 99.99%

> 99.95%

Lead at pH 6.5

0.015 mg/L

0.15 mg/L

0.15 mg/L+10%

< 0.001 mg/L

< 0.001 mg/L

> 99.33%

> 99.33%

0.010 mg/L

Lead at pH 8.5

0.015 mg/L

0.14 mg/L

0.15 mg/L+10%

0.001 mg/L

0.003 mg/L

> 99.29%

97.86%

0.010 mg/L

Lindane

0.0002 mg/L

0.0216 mg/L

0.002 mg/L+10%

< 0.00002 mg/L

< 0.00002 mg/L

99.07%

98.75%

0.0002 mg/L

Atrazine

0.003 mg/L

0.008 mg/L

0.009 mg/L+10%

< 0.002 mg/L

< 0.002 mg/L

> 76.12%

> 66.67%

0.003 mg/L

*Tested using a flow rate of 0.5 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 68° ± 5°F (20° ± 3°C) ** Measurement in Particles/ml. Particles used were 0.5-1 microns

*** NTU=Nephelometric Turbidity units

Operating Specifications

Capacity: certified for up to 750 gallons (2,838 l); up to six months

Pressure requirement: 40–120 psi (2.8–8.2 bar)

Temperature: 33–100ºF (0.6–38ºC)

Flow rate: 0.5 gpm (1.9 lpm)

General Installation/Operation/Maintenance Requirements

Flush new cartridge at full flow for 3 minutes to purge out trapped air.

Replace cartridge when flow becomes too slow.

Special Notices

Installation instructions, parts and service availability, and standard warranty are included with the product when shipped. This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.

Check for compliance with the state and local laws and regulations.

Note that while the testing was performed under standard laboratory conditions, actual performance may vary. Systems must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines.

System tested and certified by NSF International against Standard 42 for the reduction of chlorine, taste and odor, particulate Class I and Standard 53 for the reduction of cyst, lead, Lindane, Atrazine and turbidity.

NSF®

Manufactured for: General Electric Company, Louisville, KY 40225

39

Page 39
Image 39
Continental Refrigerator 22, 20 installation instructions Performance Data Sheet, Operating Specifications, Special Notices

22, 20 specifications

The Continental Refrigerator 20 and 22 series are sophisticated commercial refrigerator units designed to meet the rigorous demands of food service operations. Known for their reliability and robust construction, these models are ideal for restaurants, catering services, and other establishments requiring efficient temperature control and food preservation.

One of the standout features of the Continental Refrigerator 20 and 22 models is their exceptional cooling technology. These units are equipped with a powerful refrigeration system that ensures rapid cooling and consistent temperature management. With digital thermostats and automatic defrosting capabilities, they maintain optimal internal conditions, reducing the risk of temperature fluctuations that can compromise food safety.

The design of the units focuses on energy efficiency, which is critical in today’s eco-conscious market. Both the 20 and 22 models utilize high-efficiency refrigeration components and insulating materials that minimize energy expenditure without sacrificing performance. They also comply with environmental regulations, ensuring that they are a responsible choice for any business.

In terms of storage space, these models boast generous capacities suitable for various types of food products. Adjustable shelving and interior LED lighting enhance visibility and accessibility, allowing staff to locate items quickly and efficiently. The stainless steel exterior adds strength and durability, while also providing an easy-to-clean surface that resists corrosion and damage from daily use.

The user-friendly design extends to the controls as well. The digital display allows for precise temperature adjustments and enables easy monitoring of internal conditions. Additionally, the units are equipped with self-closing doors that help maintain the internal climate while offering ergonomic access for staff.

Safety features are also emphasized in the Continental Refrigerator 20 and 22 models. The door gaskets are designed to create an effective seal, preventing cold air from escaping and ensuring energy efficiency. Moreover, these refrigerators are equipped with a wide range of safety alarms to alert users in case of temperature discrepancies or door malfunctions.

Overall, the Continental Refrigerator 20 and 22 series represent a blend of functionality, reliability, and user-centric design, making them a smart investment for any commercial kitchen looking to enhance their food preservation solutions. With their advanced features and durable construction, these refrigerators stand out as a preferred choice for food service professionals.