Mitsubishi Electronics XD435U-G Signal, SIGNAL - USER No need to adjust in normal use, XGA60

5 SIGNAL

HORIZ. POSITION	Use to adjust the horizontal position of the image.
VERT. POSITION	Use to adjust the vertical position of the image.
FINE SYNC	Use to synchronize the projector with the PC input signal
	so that the image is not blurred.

opt.

SIGNAL

XGA60

TRACKING	Use to eliminate image noise such as wide stripes.
COMPUTER INPUT	The projector adjusts its settings automatically when
	connected to a DVD player equipped with a component
	video output (Y, CB, CR). When the projector is connected
	with a device having an RGB terminal, choose RGB
	manually.
SET UP	When OFF is selected, the black area becomes make
	lighter. When 3.5% or 7.5% is selected, the black area
	becomes thicker.

HORIZ. POSITION	0
VERT. POSITION	0
FINE SYNC.	0
TRACKING	0
COMPUTER	RGB
RRGGBB INPUT
SET UP	7.5%
HOLD	ON
USER	OK

HOLD Use to adjust the image when flagging occurs near the top of the screen.

6SIGNAL - USER (No need to adjust in normal use.)

CLAMP POSITION/

CLAMP WIDTH	Use to correct solid white or solid black in the projected
	image.

Important:

•You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is supplied.

USER

CLAMP	0
POSITION
CLAMP WIDTH	1

EN-20