Mitsubishi Electronics XD480U user manual Advanced features Continued

Models: XD480U

1 34
Download 34 pages 36.22 Kb
Page 22
Image 22
Advanced features (Continued)

Advanced features (Continued)

Setting of the image displayed during startup or muting

You can display your desired image as the startup screen (or splash screen). Using the menu, you can also use such image as a background that is displayed while the video is muted or no signal is supplied.

Important:

You can't set IMAGE CAPTURE when PASSWORD FUNCTION in the FEATURE menu has been set to SPLASH ID SCREEN to enable the password lock.

Setting procedure

1.Press the COMPUTER button to select the image supplied to the COMPUTER/COMPONENT VIDEO IN terminal.

2.Display your desired image.

3.Display the INSTALLATION menu.

4.Select IMAGE CAPTURE by pressing the ￿ or ￿ button.

5.Press the ENTER button.

• The setting menu will be displayed.

opt.

XGA60

INSTALLATION

CUSTOM IMAGE CAPTURE

BACK COLOR

GRAY

 

 

 

 

SIZE

x1

 

 

 

 

CAPTURE

GO

 

 

 

 

 

 

 

Set the background color

(Set the background color only when you set the image size to x1 or x2.)

6.Select BACK COLOR by pressing the ￿ or ￿ but- ton.

7.Select your desired color for the background (GRAY,

RED, GREEN, BLUE, BLACK, WHITE, RED50%, GREEN50%, or BLUE50%) by pressing the ￿ or ￿ button.

Set the image size

8.Select SIZE by pressing the ￿ or ￿ button.

9.Select x1, x2, or FULL by pressing the ￿ or ￿ but- ton.

 

PROJECTOR XD450

 

PROJECTOR XD450

 

PROJECTOR XD450

 

 

 

 

 

 

 

 

 

 

x1

 

 

x2

FULL

Capture the image

10.Select CAPTURE by pressing the ￿ or ￿ button.

11.Press the ENTER button.

A red frame appears. (The size of the red frame is 295x222 pixels.)

XD450UCAPTURE : ENTER X2

CANCEL : MENU

CAPTURE : ENTER + ENTER

CANCEL : MENU

12.Adjust the size of the image to be captured so that such image stays within the red frame.

Press the ￿, ￿, ￿ or ￿ button to move the red frame.

You can't move the red frame outside the screen.

XD450U

CAPTURE : ENTER X2

CANCEL : MENU

13.Press the ENTER button twice.

• Image capture will start.

CAPTURING IMAGE !

LVP-XD300

Press the MENU button to cancel the procedure.

When the image capture completes, the captured image will be displayed for 2 seconds.

Important:

You can't change the new startup screen back to the original startup screen. (Even when you select RE- SET ALL in the FEATURE menu, the factory default screen isn't available any longer.) When you want to change the startup screen again, capture another image.

The captured image will be displayed from the next startup. If the captured image isn't displayed, make sure that the setting of SPLASH SCREEN in the IN- STALLATION menu isn't OFF. (See page 17.)

To display the captured image while the video is muted, set MUTE MODE in the INSTALLATION menu to IMAGE. (See page 17.)

When BACK COLOR in the INSTALLATION menu is set to IMAGE, the captured image will be displayed while no signal is supplied.

Some images can't be captured correctly because of their signal type.

EN - 22

Page 22
Image 22
Mitsubishi Electronics XD480U Advanced features Continued, Setting of the image displayed during startup or muting