Advanced features

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details. You can view the image in its original size in the REAL mode.

The EXPAND mode doesn't work with video or S-video signal.

The EXPAND mode doesn't function with some in- put signals. For details, see page 33.

EXPAND REAL

Magnified im-

Native resolution

age

display

To choose the EXPAND or REAL mode:

1.Press the MENU button.

2.Press the ￿ or ￿ to select the FEATURE menu.

3.Press the ENTER button.

4.Press the ￿ or ￿ button to select EXPAND MODE.

5.Press the ￿ or ￿ to choose EXPAND or REAL.

6.Press the MENU button twice to exit the menu.

To use the EXPAND mode:

1.Press the EXPAND button.

You can select the area to be magnified by press- ing the ￿, ￿, ￿, or ￿ button on the remote control.

You can change the magnification of the selected area by pressing the + or - button.

2.Press the EXPAND button again to the exit the EX- PAND mode.

The regular operation screen will appear.

Important:

• In the EXPAND mode, you can't adjust the volume.

To use the REAL mode:

1. Press the EXPAND button.

In the REAL mode, press the ￿ or ￿ button on the remote control for fine adjustment.

In the REAL mode, the AUTO POSITION button doesn't function. When this button is pressed, the prohibition mark () appears on the screen.

2.Press the EXPAND button again to the exit the REAL mode.

• The regular operation screen will appear.

Picture in Picture (PinP)

One of the special features of this projector is the

ENGLISH

picture-in-picture (PinP) mode. The PinP mode allows

 

you to view the images from different sources at the

 

same time.

 

To use the PinP mode

1. Press the PinP button on the remote control.

When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN terminal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn't activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO 1 or VIDEO 2 button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

• The PinP mode will be canceled.

To change the position of the sub image:

Press the ￿ or ￿ buttons on the remote control.

Important:

The motion may not run smoothly in the PinP mode.

The PinP mode isn't available with some input signals. For further information, see page 33.

When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

Do not display a still picture for a long time because the afterimages may persist on the screen.

EN - 21

Page 21
Image 21
Mitsubishi Electronics XD480U user manual Advanced features, Expand, Picture in Picture PinP, Still