Mitsubishi Electronics XL2U Bottom side, Remote control, About the laser beam, C A U T I O N

Bottom side

2

1

Remote control

1

2

3

4			COMPUTER	20
			VIDEO
5	KEYSTONE			19
		1	2
6	EXPAND	P in P	AUTO POSITION	18
	VOLUME		LASER
7	–	+		17
8				16
				15
9				14
10	MENU R-CLICKENTER			13
	MUTE	STILL	16 : 9
11				12

21

1Lamp cover

2Adjustment foot

Caution:

Do not replace the lamp right after using the projector. The lamp is very hot.

1Laser aperture

2Transmission window

3Indicator

4POWER button

5KEYSTONE button

6EXPAND button

7+ , – (VOLUME) buttons

8Mouse pointer

9MENU button

10STILL button

11MUTE button (Audio/Video)

1216 : 9 button

13ENTER button

14R-CLICK button (For mouse)

15Direction buttons

16LASER button

17AUTO POSITION button

18PinP button

19VIDEO 1, 2 buttons

20COMPUTER button

21Left click button (For mouse)

•The + and - buttons are used in the KEYSTONE adjustment and the EXPAND mode in addition to the volume control.

•Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER button, it is emitted only one minute. To keep emitting it longer, press the LASER button again.

•You can disable the LASER button to prevent laser radiation due to misuse of the button.

How to disable the LASER button

While holding the LASER button down, press the } button three times.

How to enable the LASER button

While holding the LASER button down, press the { button three times.

•When the batteries are changed, the LASER button will be enabled.

ENGLISH

AVOID EXPOSURE-LASER RADIATION IS EMITTED

FROM THIS APERTURE

C A U T I O N
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT :	1mW
CLASS 2 LASER PRODUCT
Complies with 21 CFR. 1040. 10 AND 1040. 11
IEC 60825-1:1993+A1:1997

About the laser beam

This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength

: 640-660 nm)

Beam Divergence : 6m distance about 10.0mm x 10.0mm (± 6.0mm)

CAUTION :

•Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.

•Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

EN – 7