Mitsubishi Electronics XL5950U user manual Basic connections, Projector + AV device

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.

Important:

•Make sure that the connected device is turned off before starting connection.

•Plug in the projector and the connected devices firmly, and unplug them by holding and pulling out their power plugs, not by pulling the power cords.

•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.

•See the owner’s guide of each device for details about their connections.

Projector + AV device

Important:

•Connect the video and audio plugs of the AV cable to the proper terminals matching their colors respectively.

•When the connected AV device uses a BNC connector for its video output, connect it to the VIDEO 1 (BNC) terminal. When both the VIDEO 1 (BNC) terminal and the VIDEO 2 (RCA) terminal are engaged at the same time, the image supplied to the VIDEO 2 (RCA) terminal takes priority.

•When the connected AV device uses a BNC connector for its S-video output, connect it to the VIDEO 2 (Y,C)(BNC) terminal. When both the VIDEO 2 (Y,C) (BNC) terminal and the S-VIDEO 2 terminal are engaged at the same time, the image supplied to the S-VIDEO 2 terminal takes priority.

When using the video (RCA) or S-video connector When using the BNC connector

	S-VCR, etc.	VCR, etc.
To S-video output
	To audio output
To S-video input	To video output

To video input

To audio input

Projector + DVD player or HDTV decoder

S-VCR, etc.VCR, etc.

To Y output

To S output

To audio output

To Y input

To video output

To S input

To audio input

To video input

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such a DVD player with this projector, use the COMPUTER/COMPONENT VIDEO INPUT 1 terminal.

DVD player or HDTV decoder		BNC-BNC cable (option)
CB(PB)	B	B/PB
Y	G	G/Y
CR(PR)	R	R/PR

to AUDIO OUT

BNC-RCAconnector (option)

COMPUTER AUDIO IN

AUDIO cable (option)

•The terminals’ names Y, PB, and PR are examples of a case where a HDTV decoder is connected.

•The terminals’ names are different depending on the connected devices.

•Use BNC-BNC cables for connection.

•The image may not be projected correctly with some DVD players.

•When connecting a HDTV decoder having RGB output terminals, set the COMPUTER INPUT to RGB in the SIGNAL menu.

EN – 10