Mitsubishi Electronics XL5980U Menu operation continued, Image, Installation, consult your dealer

Menu operation (continued)

1IMAGE

CONTRAST	Adjusts the picture contrast. The contrast becomes higher as the	opt.
	number increases.		XGA60
BRIGHTNESS	Adjusts the image brightness. The image becomes brighter as	IMAGE
	the number increases.	CONTRAST	0
sRGB	Select ON to display an image emphasizing on the color
		BRIGHTNESS	0
	reproducibility.
		sRGB	OFF
	• When sRGB is ON, COLOR MATRIX, COLOR TEMP. and
		COLOR MATRIX	COMPUTER
	GAMMA COLLECTION can’t be ad justed.
COLOR MATRIX	Adjusts the color balance in each color of the image. See page 18.	COLOR TEMP.	STANDARD
COLOR TEMP	Adjusts the color temperature. See page 19.	COLOR	0
COLOR	Adjusts the color intensity of the image. (Available only when	TINT	0
	VIDEO is selected as the source.)
		SHARPNESS	0
TINT	Adjusts the color balance of the image. The color balance of the
		GAMMA MODE	AUTO
	image shifts green as the number increases and shifts to purple
	as the number decreases. (Available only when VIDEO is
	selected as the source.)

•When the TV50 (PAL, SECAM) signal is inputted, TINT can’t be adjusted. SHARPNESS ....... Adjusts the image sharpness. The image sharpness rises as the number increases.

GAMMA MODE ... When AUTO is selected, the appropriate gamma mode is automatically selected depending on the

input signal. For normal use, select AUTO. Select DYNAMIC for computer sources. Select STANDARD for sport scenes and video sources. Select THEATER for projecting film sources.

2INSTALLATION

AUTO POWER ON ...... Select ON to boot up the projector automatically by turning on				opt.	XGA60
an externally connected power switch such as a breaker even
	INSTALLATION
when the main power switch of the projector is off. Use this
			AUTO POWER		OFF
setting when the projector is hanging from the ceiling.			ON
• The projector will be in the stand-by mode when the lamp			AUTO POWER		OFF
			OFF
is off. Use the remote control to turn on the lamp.		ON	SPLASH SCREEN		ON
AUTO POWER OFF .... Set the time elapsed before the projector enters into the stand-by
			BACK COLOR		BLUE
mode when there is no signal inputted from the selected source.
			MUTE MODE		BLACK
SPLASH SCREEN ....... Select ON to display the splash screen when the power is turned
			LAMP MODE		STANDARD
ON.
			IMAGE REVERSE		OFF
• The splash screen can be changed. For more details, please
consult your dealer.			LENS SHIFT		USER

BACK COLOR ...... Use to select the background, BLUE, BLACK or LOGO, which

will be displayed when there is no signal inputted from the selected source. When the LOGO is selected, the splash screen will be displayed.

MUTE MODE ...... Use to select the background, BLACK or LOGO, which will be displayed when the MUTE button is

pressed. When the LOGO is selected, the splash screen will be displayed.

LAMP MODE ....... Use to change the brightness of the lamp. When LOW is selected, the image will become darker,

though the power will be saved, operating sound will be reduced.

•The intensity of the lamp will be STANDARD for 2 minutes regardless of the setting of the LAMP MODE when the lamp turns on.

•When the LAMP MODE is changed, the screen may flicker. This is not a failure of the lamp. IMAGE REVERSE ...... Use to reverse or invert the projected image. Select MIRROR in rear projection. Select MIRROR,

INVERT in rear projection with the projector hanging from the ceiling.

LENS SHIFT ........ To enter the LENS SHIFT setting mode, press the ENTER button. For lock the lens position, set

LOCK to ON. For reset the lens position, select RESET and press the ENTER button.

•When no signal is supplied for 6 hours with BACK COLOR set to BLACK, it changes to BLUE automatically for the purpose of protecting the projector.

•When you continue projection for a long time with BACK COLOR or MUTE set to LOGO, an after-image may persist on the screen.

•When the signal is lost during muting with MUTE set to LOGO, AUTO POWER OFF is ignored even though it is active.

EN – 16