Mitsubishi Electronics XL650U Advanced features, EN-32, Expand, Picture in Picture PinP, Still

Advanced features (continued)

Expand

By pressing the EXPAND button on the remote control, you can magnify the image to view the details.

•The EXPAND mode doesn’t function with some input signals. For details, see page 43.

•The EXPAND mode doesn’t work with video or S-video signal.

EXPAND

Magnified image

To use the EXPAND mode:

1.Press the EXPAND button.

•You can select the area to be magnified by pressing the ￿, ￿, ￿, or ￿ button on the remote control.

•You can change the magnification of the selected area by pressing the + or - button.

2.Press the EXPAND button again to exit the EXPAND mode.

•The regular operation screen will appear.

Important:

• In the EXPAND mode, you can’t adjust the volume.

Picture in Picture (PinP)

One of the special features of this projector is the picture-in-picture (PinP) mode. The PinP mode allows you to view the images from different sources at the same time.

To use the PinP mode

1.Press the PinP button on the remote control.

•When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN-1/IN-2 terminal displayed on the screen, the image from the VIDEO IN or S-VIDEO IN terminal is displayed as the sub image.

•When the image from the VIDEO IN or S-VIDEO IN terminal is displayed, the PinP mode isn’t activated.

•When the component video signal is inputted, the PinP mode isn’t activated.

2.If necessary, select the desired external input source of the sub image by using the VIDEO or S-VIDEO button on the remote control or the VIDEO button on the control panel.

3.Press the PinP button on the remote control.

•The PinP mode will be canceled.

To change the position of the sub image:

Press the ￿ or ￿ buttons on the remote control.

•When there is no video signal for sub image, you can’t change the display position.

Important:

•The motion may not run smoothly in the PinP mode.

•The PinP mode isn’t available with some input signals. For further information, see page 43.

•When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.

•The PinP mode is available only when the ASPECT ratio is set to AUTO.

Still

To stop the motion in the image temporarily (or to dis- play a still image):

Press the STILL button on the remote control.

• The image will freeze temporarily.

To resume the motion in the image:

Press the STILL button on the remote control again.

Important:

•Do not display a still picture for a long time because the afterimages may persist on the screen.

EN-32