Speciﬁcations, EN-42 | Mitsubishi Electronics XL650U specification

Speciﬁcations

The speciﬁcations and outside appearance of the projector are subject to change without prior notice.

Type			LCD projector
Model			XL650U / XL550U
Display Technology			0.8-inch LCD panel: 3 pieces (for R,G,B)
			Pixel: 1024 x 768 = 786432 pixels			Total 2359296 pixels
			Active pixel rate: 99.99% or more (each panel)
Projection lens			F 1.7 - 1.9 f= 24 - 29 mm
Light-source lamp			261 W (XL650U) / 200 W (XL550U)
Image size (Projection distance)			40” min. to 300” max. (Projection distance 1.2 to 9.1 m)
Maximum		Computer signal	Maximum resolution: 1600 x 1200 dots (Analog)/compressed
resolution			Panel resolution: 1024 x 768 dots
		Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
		Component	480i, 480p, 576i, 576p, 720p, 1080i
		signal	Panel resolution: 1024 x 768 dots
Computer/Component video input			[Signal type]		[Terminal type]	[Line]
			Analog RGB		Mini D-SUB 15-pin	2
			Digital RGB		DVI-D	1
Video input			[Signal type]		[Terminal type]	[Line]
			Video input		RCA	1
			S-Video input		S	1
Audio input			[Signal type]		[Terminal type]	[Line]
			RGB		Stereo mini jack (ø3.5)	2
			Video		RCA (L, R)	1
			S-video		RCA (L, R)	1
Monitor output			[Signal type]		[Terminal type]	[Line]
			Analog RGB		Mini D-SUB 15-pin	1
Audio output			[Signal type]		[Terminal type]	[Line]
			RGB/Video/S-video		Stereo mini jack (ø3.5)	1
Speaker			3 W Mono Round type ø4.5 cm x 1
Control terminal/Others			RS-232C (D-SUB 9-pin), USB terminal, LAN terminal (RJ-45)
Operating temperatures			+41°F (+5°C) to +95°F (+35°C)
Rated voltage			AC100 - 240 V, 50/60 Hz
Power consumption			3.9 A (XL650U) / 2.9 A (XL550U)
Dimensions			333 mm (W) x 113 mm (H) x 272 mm (D) * Not including protrusion.
Weight			4.7 kg (XL650U)/4.5 kg (XL550U)
Others		S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
			Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
		Video input	Vp-p=1.0 V 75 Ω (negative sync)
		Component video	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
		input		Vp-p=0.7 V 75 Ω (CB, CR)
		Analog input	RGB:	Vp-p=0.7 V 75 Ω (negative sync)
			YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
			HD/CS: TTL-level (negative or positive polarity)
			VD:	TTL-level (negative or positive polarity)
		Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
		Audio input	350 mVrms, 10 kΩ or more
		DC OUT	5 V 1.5 A (max) (For wireless LAN unit *1)

*1 : Wireless LAN unit isn’t packaged together with the projector.

Replacement part

(Option/Not included in the box)

Spare lamp (for XL650U): VLT-XL650LP

Spare lamp (for XL550U): VLT-XL550LP

EN-42

Image 42

Mitsubishi Electronics XL650U user manual Speciﬁcations, Replacement part Option/Not included in the box, EN-42

Contents

XL650 XL550 When using the projector in Europe EN-2 Contents Important safeguards EN-4 Do not unplug the power cord during op- eration Do not keep using the damaged projectorDo not look into the lens when it is operating Place of installation Checking accessories Inserting the batteries into the remote controlPreparing your projector Terminal board OverviewControl area EN-7 Bottom side Remote controlPreparating your projector EN-8 Reception angle Using the remote controlOperational range of the remote control EN-9 Basic setup Setting up your projectorSetting up the screen Adjusting the projection angle Front projection, ceiling mounting Wall screenEN-11 Rear projection Screen size and projection distance Setting up your projectorWhen the aspect ratio of the screen is EN-12 Connecting the projector to a computer Viewing computer imagesEN-13 EN-14 Plugging the power cordViewing computer images About DDC Projecting images EN-15 AV mute When connecting to a notebook computerTo stop projecting Auto Position button When a TV tuner or VCR is connected Connecting the projector to video equipmentConnecting to a video player, etc Viewing video images Viewing video images Plugging in the power cordConnecting To video equipment having a DVI-D terminal Projector + DVD player or Hdtv decoder Projecting images EN-19 Volume from the speaker EN-20 When projected images are distorted to a trapezoid Setting the aspect ratioHow to change the settings EN-21 Menu operation EN-22 How to set the menus Available settings in the menusEN-23 EN-24 EN-25 Menu operation EN-26 To adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To sharpen or soften the projected image Sharpness About color temperature Adjusting projected imagesTo adjust the tone of white Color Temp Color Enhancer To adjust the vertical position EN-29LPF Progressive ﬁlter EN-30 Advanced featuresSetting of the image displayed during startup or muting XL650U To cancel the password function Password functionTo enable the password function EN-31 Expand Advanced featuresEN-32 Picture in Picture PinP Mouse remote control EN-33Operation Major functions Supervising and controlling by computerEN-34 Connection Abnormal condition IndicatorsNormal condition EN-35 Interval of lamp replacement Replacing the lampEN-36 To replace the lamp Reset of the lamp operation timeWhen removing the lamp from the ceiling-mounted projector EN-37 Cleaning of the projector and the ventilation slots MaintenanceCleaning of the air-ﬁlter Cleaning of the lens Troubleshooting No image appears on the screen Problem SolutionEN-39 EN-40 TroubleshootingProblem Solution Images are not displayed correctly EN-41 Images are not displayed correctly Problem SolutionOthers Problem Solution Kensington Lock Replacement part Option/Not included in the box SpeciﬁcationsEN-42 EN-43 XGA85 Connectors EN-44COMPUTER/COMPONENT Video IN-1/IN-2 DVI-D Hdcp Mitsubishi Projector Contact Information