Mitsumi electronic 838 Series, 738 Series manual Before You Begin, First-Time Power-On, TV Tips

81. Basic Setup and Operation

Before You Begin

1.Review the important safety, installation, and oper- ating information at the beginning of this book.

2.Choose a location for your TV.

•Allow at least four inches of space on all sides of the TV to help prevent overheating. Over- heating may cause premature failure of the TV as well as shortened lamp life.

•Avoid locations where light may reflect off the screen.

•See the stand requirements on page 2.

3.Install the batteries in the remote control.

4.Plug the TV into an AC power outlet.

TV Tips

Turning the TV On or Off

•Point the bulb end of the remote control at the front of the TV and press the POWER key.

•Press the POWER button on the TV control panel.

If You Turn Off the TV by Mistake

•Press POWER again, within about 60 seconds, to have the TV come back on immediately.

•If the STATUS indicator is flashing green, (about 60 seconds after you shut off power), wait a few moments for the indicator to stop flashing and press POWER to turn the TV on again.

First-Time Power-On

Controlling Sound Volume

• Press VOL to adjust the sound level.

1. Press the TV key to

TV

• See also “Controlling A/V Receiver Sound

ensure that the remote	TV
control is in TV mode.

2. Aim the bulb end of the remote control at the TV and press the POWER key . Wait for the Welcome screen.

3.If you wish to change the menu language to Español, press .

4.Press to highlight EXIT. Press ENTER to clear the menu.

Volume” on page 31.

Changing Channels (antenna sources)

NOTE: Perform a channel scan to enable recep- tion of digital channels. See Setup > Channel, page 55.

•Enter the channel number using the number keys on the remote control and press ENTER. For a two-part digital channel, such as 3-1,

—1 to include a dash (separator).

CANCELpress 3

•Press CH to change channels one channel at a time.

•Press and hold CH to move quickly through channels.

•Press LAST to return to the previously tuned channel.

•Press GUIDE to display ChannelView channel listings, highlight a channel, and press ENTER.

•Use the Fav (Favorites) feature to tune to up to nine favorite channels. See page 28.

•Use the CH key to tune to preselected groups of channels using ChannelView custom channel banks. See page 29.

DownloadedFor assistanceFrom TV-Manualcall.com1(800)Manuals 332-2119