Replacing the lamp (continued)

To replace the lamp:

1.Unplug the power cord.

2.Loosen two screws (a) using a Phillips screwdriver

(+) and remove the left side panel from the projector.

(a)

3.Loosen the screw (b) using a Phillips screwdriver (+), and remove the lamp cover (c).

(b)(c)

4.Loosen the screws (d) using a Phillips screwdriver

(+).

(d)

5.Pull the handle.

6.Pull out the lamp box by the handle while holding the projector.

•Pull the lamp box out of the projector slowly. If it is pulled out quickly, the lamp may break scattering glass fragments.

•Do not spill liquid on the removed lamp box or do not place it near any flammable object or where children can reach to prevent injury or fire.

7.Load a new lamp box securely into the projector in the right orientation.

8.Put the handle back to the original position.

•Make sure that the handle is locked.

9.Tighten up the screws (d) using a Phillips screwdriver (+).

(d)

10.Tighten up the screw (b) using a Phillips screwdriver (+) to secure the lamp cover (c).

(b) (c)

11.Attach the left side panel to the projector and fix it with two screws (a).

(a)

Reset of the lamp operation time

12.Plug in the power cord.

13.Hold down the W, X, and POWER buttons on the control panel at the same time about 3 seconds.

Important:

•Unless these 3 buttons are held down at the same time, the lamp operation time isn’t reset.

•Make sure that the STATUS indicator blinks twice and the lamp operation time is reset successfully.

•The projector doesn’t turn on if the lamp cover isn’t attached securely.

•Be sure to reset the lamp operation time whenever you replace the lamp.

•Do not reset the lamp operation time unless you replace the lamp.

•The lamp is fragile. If it is broken, be careful not to cut yourself with glass fragments.

Caution:

•This projector uses a lamp that contains mercury. Disposal of the lamp or the projector with the lamp may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For the U.S. only.)

EN-37

Page 36 Page 38
Page 37
Image 37
Mitsumi electronic HC6500 user manual Replacing the lamp, To replace the lamp, Reset of the lamp operation time
Page 36 Page 38

HC6500 specifications

The Mitsumi HC6500 is an innovative electronic component that has garnered attention for its versatile features and advanced technologies. This device is primarily known for its role as a high-performance connectivity solution in various electronic applications. The HC6500 stands out in the crowded market of electronic components by incorporating several key characteristics that enhance its overall functionality and usability.

One of the main features of the HC6500 is its wide compatibility with various communication protocols. This allows it to easily integrate into different systems, whether they are automotive, industrial automation, or consumer electronics. The device supports both wired and wireless communication, making it a flexible option for designers looking to streamline their connectivity solutions.

The HC6500 also boasts a compact design, which reduces space requirements in circuit designs. Its form factor is particularly beneficial for applications where space is at a premium, such as in portable devices and IoT gadgets. This small footprint does not compromise performance, as the HC6500 delivers robust connectivity with high data transfer rates that cater to the demands of modern applications.

In terms of power efficiency, the HC6500 is engineered to operate with low power consumption, which is essential for battery-operated devices. This energy efficiency is complemented by its advanced thermal management features, ensuring stable performance even under heavy loads or extended use.

The device also incorporates sophisticated error correction technologies, which enhance data integrity during transmission. This is particularly vital in critical applications, such as medical devices and automotive systems, where data accuracy is non-negotiable. The HC6500’s ability to maintain a reliable connection under various environmental conditions is another hallmark of its design.

Furthermore, the HC6500 is built with an emphasis on durability. Its materials and construction are designed to withstand extreme temperatures, vibrations, and other challenging conditions often encountered in industrial and outdoor environments. This reliability ensures that the HC6500 can perform consistently over a long lifespan, reducing maintenance and replacement costs.

Overall, the Mitsumi HC6500 is a well-rounded electronic component that combines cutting-edge technology with practical features, making it an excellent choice for designers and engineers looking to enhance their products with reliable connectivity solutions.
Top Page Image Contents