MK Sound MPS-5410 MPS-5310Specification, Transducer Type, Rated Power Output, Response Anechoic

11.MPS-5310 Specification

Transducer Type (x2)

•12” Acrylic polymer coated heavy paper cone

•Acrylic polymer coated foam surround

•1 Inch voice coil length

•2 Inch voice coil diameter

•Kapton (voice coil former bonded with high temperature epoxy)

•Voice coil is asymmetrically hung

•Under cut ventilated pole piece

•Bumped back plate

•38 oz ceramic main magnet

•26 oz bucking magnet with foam damper

Rated Power Output

Peak Power Output (20 millisecond pulse) Amplifier Distortion

Differential Input Impedance

Balanced

Unbalanced

Amplifier Noise Relative To Full Output Maximum Acoustic Output

Response (Anechoic)

THX Position

350 Watts RMS

600 Watts

Less than .03% from 20Hz to 200Hz at full output.

61K Ohms

15K Ohms

-90dB

113dB @ 1 Meter

(pass band 40Hz - 150Hz)

-3dB at 35Hz

+/-1dB pass band (40Hz to 150Hz) -3dB at 200Hz

Anechoic Position

Low Pass Filter

80Hz Filter

Variable Filter

Dimensions (H x W x D)

Weight

Replacement Fuse Values

110 Volt (US) External Fuse

220 Volt (US) External Fuse

220 Volt (IEC 127-2III) External Fuse Internal Fuse (all versions)

-3dB at 20Hz

+/-1dB pass band (40Hz to 150Hz) -3dB at 200Hz

24dB per Octave 80Hz

36dB per Octave - 50Hz to 125Hz

23” x 15 1/4" x 19 5/8”

84 lbs

6.0Amp 3AG - 1/4" x 1 1/4" Slow-Blow

3.0Amp 3AG - 1/4" x 1 1/4" Slow-Blow T 3.15 A 5 x 20 mm Time-Lag

7.0Amp 3AG - 1/4" x 1 1/4" Fast-Blow

MPS Sub Manual.qrk

4/25/2000 pt.

13