![MONITOR UNIT FEATURES & COMPONENTS](/images/new-backgrounds/26778/267787x1.webp)
MONITOR UNIT FEATURES & COMPONENTS
| 1 |
1. TFT LCD Display |
|
2. Channel Indicator LEDs | 2 |
3. Channel Selection Switch | 3 |
4. Speaker | 4 |
|
5. Automatic Channel Scan Indicator | 5 |
| |
6. Power On/O Indicator |
|
7. Power On/O Switch & Volume Control |
|
8. LCD On/O Switch | 10 |
|
9.DC Jack
10.Belt Clip
11. Brightness Controls | 12 |
12. Battery Door
13. Audio/Video Output
14. | 14 |
|
7
8
9
6
11
13
FCC REGULATION
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu- nications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
l Consult the dealer or an experienced radio/TV technician for help.
Operation with
3 | 12 |