Moen 200-0564 manual Priority

4.Press L/OUT. The frequency you want to remove the lockout from disappears.

If there is another locked-out frequency, it appears on the display. If there are no more locked-out frequencies, the scanner continues searching.

Reviewing Locked-Out Channels/Frequencies

To review the channels you lock out, press MANUAL, then repeatedly press L/O RVW. As you press L/O RVW, the scanner displays all locked-out channels.

To review the frequencies you locked out, press BAND, LIMIT, or DIRECT/. to start a search, then press L/O RVW. L-r appears on the display.

As you press Up or Down Arrow, the scanner displays all locked-out frequencies.

PRIORITY

The priority feature lets you scan channels and still not miss important or interesting calls on the priority channels. You can program up to 10 frequencies as the priority channels. When you turn on the priority feature, as the scanner scans channels, it checks the priority channels every 2 seconds for activity.

Note:

You can lock out priority channels. If you lock out all priority channels, the display shows PCH ALL-OFF when you lock out the last channel.

Follow these steps to store frequencies in the priority channels.

1.Press PGM.

2.Use the number keys to enter the priority channel number (1-10) where you want to store the frequency, then press PRI.

3.Use the number keys to enter the frequency you want to store into

that channel.

4.Press ENTER to store the frequency. Notes:

If you entered an invalid frequency in Step 3, the scanner beeps and displays Error. Simply repeat Steps 3 and 4.

Your scanner automatically rounds the entered frequency down to the closest valid frequency.

If you enter a frequency that is already stored in another channel,

the scanner beeps three times and displays the lowest channel number where the frequency is already stored, and -dUPL- briefly flashes.