Moen 200-0564 manual Look AT the Keypad

Once you understand a few simple terms we use in this manual and familiarize yourself with your scanner's features, you can put the scanner to work for you. You simply determine the communications you want to receive, then set the scanner to scan those frequencies.

A frequency is the tuning location of a station (expressed in kHz or MHz). To find active frequencies, you can use the search function to search bands, which are preset ranges of frequencies.

When you find a frequency, you can store it into a permanent memory location called a channel, which is grouped with your other channels in a channel-storage bank. You can then scan the channel-storage banks to see if there is activity on the frequencies stored there. Each time the

scanner finds an active frequency, it stays on that channel until the transmission ends.

Another option is to store the frequency into a temporary memory location called a monitor memory until you decide to move it to a channel.

Just keep in mind - you search frequencies an scan channels.

A LOOK AT THE KEYPAD

Your scanner's keys might seem confusing at first, but this information should help you understand each key's function.

SCAN - scans through the programmed channels.

AUTO - automatically programs frequencies into channels.

L/O RVW - lets you review locked-out channels or frequencies.

LIGHT - turns the displays backlight on or off.

KEY (SYMBOL) - locks/unlocks the keypad to prevent accidental entries.

MANUAL - stops scanning to let you directly enter a channel number.

DELAY - programs a 2-second delay for the selected channel.

LIMIT - sets the frequency range you want to search.

Up Arrow and Down Arrow - searches up or down from the currently displayed frequency.

MON - accesses the 40 monitor memories.