Manuals / Fujitsu / Computer Equipment / Personal Computer

Fujitsu TX120 Drives reported as dead when starting system, Added drive reported as defective

Models: TX120

1 82

Download 82 pages 63.94 Kb

Page 59

Troubleshooting and tips Drives reported as “dead” when starting system

7.8Drives reported as “dead” when starting system

This error message can occur when the onboard SAS controller has RAID functionality or the server is equipped with a PCI RAID controller.

RAID controller configuration incorrect

ÊCheck and correct the settings for the drives using the RAID controller utility. Further information is provided in the manual for the RAID controller.

7.9Added drive reported as defective

RAID controller is not configured for this drive

The drive was probably installed when the system was switched off.

ÊReconfigure the RAID controller for the drive using the corresponding utility. Information is provided in the documentation for the RAID controller.

or

ÊRemove and reinstall the drive while the system is switched ON.

If the drive continues to be reported as defective, then replace it (see “Installing the HDD module” on page 65 and “Removing the HDD module” on page 66).

7.10Error message on screen

The meaning of the error message is explained in the manual for the BIOS-Setupand in the documentation for the relevant components and programs on the PRIMERGY ServerBooks DVD.

TX120

Operating Manual

59

Image 59

Fujitsu TX120 Drives reported as dead when starting system, Added drive reported as defective, Error message on screen

Contents

Primergy TX120 Server Certified documentation according to DIN EN ISO Comments… Suggestions… Corrections…Contents Contents Contents Page Documentation overview IntroductionAdditional server documentation Documentation overviewConcept and target groups for this manual Further sources of information IntroductionHard disk drives FeaturesFeatures System boardHigh level of availability and data security HDD expansion box and accessible drivesPower supply USB portsIRMC with integrated service LAN port ServerStart Server ManagementRemoteView Service and supportNotational conventions Compliance with regulations and standards Technical dataTechnical data Electrical dataVentilation clearance WeightMechanical values Upright operating positionPage Set up the server see section Setting up the server on Installation steps, overviewInstallation steps, overview Important information SafetyBefore starting up SafetyInstallation and operation Important information Safety Batteries Never remove parts of the CD/DVD drive casing Working with CDs/DVDs and CD/DVD drivesLaser information ESD label Modules with Electrostatic-Sensitive DevicesOther important information CE conformityFCC Class a Compliance Statement CE conformityTransporting the server Environmental protection Returns, recycling and disposal Labels on plastic casing partsPage Hours Hardware installationMinimum acclimatization time Unpacking the server Unpacking the serverHardware installation Setting up the serverClipping the stabilizers together Setting up the serverAdjusting the width of a stabilizer Adjusting the width of the stabilizersPlacing the server on stabilizers Placing the server on the stabilizersPositioning the server horizontally Connecting devices to the server Connecting devices to the serverConnecting the server to the mains Connecting the server to the mainsDisconnecting cables Connecting cablesOpening the drive cover Starting up and operationControls and displays Controls and displaysControls Starting up and operationIndicators on the control panel Indicators on the HDD module CD/DVD indicatorRear of server Starting up for the first time Switching the server on and offSwitching the server on System already installedRing indicator Switching the server on and offSwitching the server OFF Specified switch on time / switch off timeServerStart advantages Configuring the serverOperating system installation Cleaning the serverCleaning the server Configuring onboard SAS controllerProperty and data protection Mechanical access protectionBios Setup security functions Page Power supply overloaded Troubleshooting and tipsPower-on indicator remains unlit Power cable incorrectly connectedScreen remains blank Server switches itself offMonitor does not support the set horizontal frequency Troubleshooting and tipsFlickering stripes on monitor screen No screen display or display driftsNo mouse pointer displayed on screen Mouse driver not loaded Mouse controller disabledNo mouse pointer displayed on screen Incorrect date and timeRAID controller is not configured for this drive Drives reported as dead when starting systemError message on screen RAID controller configuration incorrectPage Hot-plug hard disk drives Handling hard disk drives and HDD modules Handling hard disk drives and HDD modulesRemoving the dummy module Removing/Installing the dummy moduleUnlocking the HDD module Installing/Removing the HDD moduleInstalling/Removing the HDD module Installing the HDD module Installing the HDD moduleRemoving the HDD module Vcaution Page Abbreviations Abbreviations ESD IRMC PS/2 Rtds Svga Page Literature Operating Manual CD-RW IndexDVD IndexPDA Saving energy Screen