Starting up and operation | Controls and displays |
Controls
On/Off button
When the system is switched off, it can be switched on again by pressing the On/Off button. When the system is operating, pressing the On/Off button will switch off the system.
IThe On/Off button does not disconnect the server from the mains. To disconnect from the mains completely, remove the power plug(s).
NMI NMI button
IDo not press! The NMI button may only be used by service personnel.
RST Reset button
Pressing the reset button reboots the system.
ID ID button
When this button is pressed, the ID display (blue) on the front of the server lights up.
TX120 | Operating Manual | 45 |
