Monitor Audio RS W12 warranty Spiked Foot Fixing For Carpeted Floors, Pad Spike

Spiked Foot Fixing For Carpeted Floors

The amazingly engineered composite Silver RS series foot encorporates a spike for use on carpeted floors and also, a soft polymer pad (for use on wooden or tiled floors).

Locking Nut

Main Threaded

Assembly

Soft Polymer

Pad

Spike

Please ensure there are no hidden wires under the carpet, or trailing mains leads that could be damaged by the spikes.

The foot comes fully assembled for use on carpeted floors. All that is required is fixing into the plinth. This is achieved by simply screwing the feet fully into the 4-threaded insert in the underside of the cabinet. If your carpet has a very thick pile, remove the soft polymer pad from the foot to ensure the spike goes right through the carpet into the floor. With great care turn your cabinet the right way up. Place the cabinet in your desired location, and check that it is level on all sides. If it is slightly off level, unscrew the spike at the lowest point and check again. Continue this process until the cabinet is fully level. Use the locking nut on the foot to fix the foot in place and to stop any unwanted vibrations.

Spiked Foot Fixing For Wooden/Hard Floors

For use on solid floors or where spikes are inappropriate, it is possible to use the foot without the spike insert. To use the foot in this manner carefully grip the knurled portion of the spike and rotate anti clockwise to unscrew the spike fully.

You may find it easier to first remove the polymer pad to gain more purchase on the spike.

The pad should be replaced before carrying out the levelling operation previously described.

6

© Monitor Audio 2005 RS W12 Rev 1