Monster Cable 400L warranty Installing the FlatScreen Mount, Wood Stud Mounting

Installing the FlatScreen Mount

Choose a mounting location with convenient access to an AC power outlet.

Wood Stud Mounting:

1)Using an electronic stud sensor, locate two wall studs, up to 21” apart, at your desired mounting location.

2)	�����	With the help of a friend, position the
	�����

mounting system’s two horizontal wall plate arms over the two wall studs. Using the provided level, confirm that the mounting system is level.

3)Mark the stud centers in two slots in the top and bottom wall plate arms with a pencil.

4)With your electrical drill and 3/16" bit, pre-drill a 3" deep hole at each mark.

5)Attach the wall plate arms to the wall using the supplied lag bolts and washers, as shown to the right. Tighten each bolt with your electric drill or socket wrench. Turn clockwise until secure.

6)Attach the wall plate arm’s quick-snap bolt covers to conceal the installed lag bolts.

DO NOT over tighten bolts. This can damage

the wall plate or the surface of your wall.

10