Routing Your TV’s Power Cord and AV Cable through the Cable Management System

1)With the mount completely installed on the wall and your TV properly secured to the mount, fully extend the mount’s swing arms.

2)Swing the mount completely to the left or right. This enables you to slide off the cable management covers on all three swing arms.

3)Connect your TV’s power cord to the TV (if TV uses a detachable-type power cord).

4)Slide the cable management covers off the swing arms, as shown to the right.

5)Route your TV’s power cord through the left cable channel.

6)Route AV cable from your wall, set-top box, AV receiver, or other source through the right channel and second arm, as shown to the right and make connections to your TV.

7)Slide the cable management covers back into place. Screw on the second arm’s cover. Replace the end cap.

22

Page 26
Image 26
Monster Cable 400L warranty