Monster Cable HTS 5000 owner manual Rack Mounting Your PowerCenter

STEP 10 Rack Mounting Your PowerCenter

A)Remove your PowerCenter trim covers using a 3/32 Allen key (not included). Turn each Allen screw counter-clockwise until it is completely removed.

B)Align one rack ear over the three 3/32 holes on the left side of the PowerCenter. Using a 3/32 Allen key, turn each Allen screw clockwise until tight.

C)Align the remaining two holes on the left side of the rack ear with the two holes on the left side of your rack. Using a screwdriver, turn two screws (not included) that fit the rack’s screw holes clockwise until tight.

D)Repeat steps B and C for installation of the rack ear on the right side of the PowerCenter.

Rack Ears

17