C)Set the Outlet Pair to “Switched On After Delay”: Press “MENU” until the display shows the status of the Audio outlet pair. Press the “SET” button until the time delay changes to the required delay in seconds before the outlet pair will turn on after the “ON/OFF” button is pressed.
When the PRO 5100 is Switched On by pressing the front panel “ON/OFF” button, or by an external trigger signal, the outlet pair will go “live” after the time delay set as described above — 20 seconds in this case. The outlet pair with the maximum time delay setting will still turn off immediately when the “ON/OFF” button is pressed, or when triggered by an external signal.
D)Set the Outlet Pair to “Unswitched (Always On)”: Press the “MENU” button until the display shows the status of the AUDIO outlet pair. Press the “SET” button until you see the display.
Once “Unswitched” is selected, any component plugged into those outlets will receive power continuously as long as your PowerSource is plugged into a 120 volt wall socket.
Note: The unit is shipped with all outlet pairs set to “Switched On”.
11
