SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

1.Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes ANSI/NFPA 70-1999),

2.including fire-rated construction.

3.Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding con-

4.ductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device,

5.such as a tag, to the service panel.

6.Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

7.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7

8.feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. Use only the screws provided with the outlet box. Use only the screws provided with the outlet box. (Mounting must support at least

9.35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating

10.blades.

11.Attach the mounting bracket using only the hardware supplied with the outlet box.

12.To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

13.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

14.NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat- ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),

15.and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 

 

Phillips Screwdriver

Wire Cutters

Pliers

 

1

 

 

2

 

 

 

 

 

 

 

 

Before you begin installing the fan, Switch

 

 

 

 

 

 

 

 

 

 

 

 

Before installing this fan make sure the outlet box is

 

power off at Service panel and lock service dis-

 

 

 

connecting means to prevent power from being

 

 

properly installed to the house structure. To reduce

 

switched on accidentally. When the service dis-

 

 

the risk of fire, electric shock, or personal injury,

 

connecting means cannot be locked, securely

 

 

mount to outlet box or supporting system acceptable

 

fasten a prominent warning device, such as a

 

 

for fan support. (Mounting must support at least 35

 

tag, to the service panel.

 

 

lbs.)

 

4

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

3Step Ladder

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securley fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wabble). Use only the screws provided with the outlet box.

6

Remove keeper from pin. Replace keeper into pin and save for later.

Loosen the 2 set screws in yoke for downrod to slip into yoke.

Place canopy and then yoke cover on downrod. Thread lead- wires and safety cable through downrod. As shown.

Page 1 Page 3
Page 2
Image 2
Monte Carlo Fan Company 3TSR52XXD installation instructions Phillips Screwdriver Wire Cutters
Page 1 Page 3

3TSR52XXD specifications

The Monte Carlo Fan Company 3TSR52XXD is a stunning addition to any indoor or outdoor space, renowned for its sophisticated design and exceptional functionality. This ceiling fan combines aesthetics with innovative technology, making it an ideal choice for homeowners seeking both style and efficiency.

One of the key features of the Monte Carlo 3TSR52XXD is its unique three-blade design, which not only enhances its modern look but also improves airflow efficiency. The fan is meticulously engineered to deliver powerful yet quiet operation, ensuring that users enjoy a comfortable environment without disruptive noise. With a 52-inch blade span, it is perfectly suited for medium to large-sized rooms, effectively circulating air to provide a refreshing breeze on warm days.

The fan is equipped with DC motor technology, which significantly increases energy efficiency compared to traditional AC motors. This technology allows the fan to operate at a lower speed while still delivering impressive airflow, resulting in lower energy consumption and cost savings over time. The DC motor also extends the fan's lifespan, making it a durable choice for any home.

Another notable characteristic of the 3TSR52XXD is its versatility in design. It is available in various finishes, including sleek matte black and sophisticated brushed pewter, allowing it to seamlessly integrate into any decor, from contemporary to traditional. The fan’s remote control convenience enables users to adjust the speed and direction effortlessly, providing a tailored comfort experience.

Moreover, the 3TSR52XXD supports reversible motor functionality, allowing for both summer and winter use. During warmer months, the blades can rotate counter-clockwise to create a cool downdraft. In colder months, reversing the blade direction pushes warm air downwards, promoting even heating throughout the space.

For added functionality, the Monte Carlo 3TSR52XXD is compatible with various smart home systems, allowing users to integrate it effortlessly into their existing setups. This smart technology not only enhances convenience but also enriches the overall user experience.

In conclusion, the Monte Carlo Fan Company 3TSR52XXD is an exemplary model that combines sleek design, advanced technology, and energy efficiency. Its aesthetic appeal, paired with its practical features, makes it a highly desirable ceiling fan for any contemporary home.
Top Page Image Contents