LOREX Technology L15LD420 Series Connecting a Slave Spot-Out Monitor Appendix #3, Not Included

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connecting a Slave (Spot-Out) Monitor - Appendix #3

Connections to a Slave Monitor / Spot-Out Monitor (not included with the System) can be made through the VIDEO OUT and/or the SPOT OUT ports on the back of the Observation System. A slave monitor can be a TV or Computer Monitor with VGA inputs.

A Slave Monitor is used as a View Only device. A Slave Monitor can only display camera data as it is sent from the Observation System (based on settings in the Spot Out Menu options).

•VIDEO OUT - Connect the VIDEO OUT port on the back of the Observation System to the VIDEO IN port on the back of the Slave Monitor. This will output all onscreen video to a secondary monitor.

•SPOT OUT - Connect the SPOT OUT port on the back of the Observation System to the VIDEO IN port on the back of the Slave Monitor

NOTE: The Video OUT and Slave out can be used at the same time, however separate monitors will need to be used.

OBSERVATION SYSTEM

VIDEO OUT

SPOT OUT

SLAVE MONITOR

(Not Included)

48