LOREX Technology L17LD420 Series, L15LD420 Series instruction manual Alarm Setup, Interval Setup

Configuration

ALARM SETUP

[CHANNEL]

Select the channel to be setup.

[INPUT]

Set up the Alarm input format.

NORMAL CLOSE- when the alarm is triggered, alarm output becomes open circuit.

NORMAL OPEN- when the alarm is triggered, alarm output becomes close circuit.

[DURATION]

For both post-alarm recording duration and the alarm out- put duration.

(1~99 seconds).

NOTE: Alarm output can be triggered by both alarm input and video loss.

Alarm output can not be triggered by motion detection.

INTERVAL SETUP

[SEQUENCE SCREEN]

Interval setup for all channels sequential full screen display (Range: 1~99 seconds)

[PIP SCREEN]

Picture in Picture, the sub-picture's sequence interval set- up.

(Range: 1~99 seconds)

[EVENT UPDATE]

In order to avoid the same event (alarm, motion and video loss) recorded from time to time, the event happens within the EVENT UPDATE period will not be recorded.

(Range: 10~990 seconds)

35