Display Modes
Display Modes
Initial Loading Sequence
•Connect the POWER cable located on the back of the Observation System. The unit will automatically power on.
•The System will load the firmware
•The System will perform a Hard Drive check.
•The unit will initially load to a split screen view, displaying all 4 cameras (if available).
NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be detected by the system.
If you choose to FORMAT a drive in this way, the drive will no longer be readable by a regular PC without using the HARD DRIVE VIEWER software included on the CD provided with this unit.
Display Setup Menu
•Right click the mouse button to display the setup menu
•Right click mouse button again to hide the setup menu.
Display Configuration
19
