SATA Hard Drive Replacement - Appendix #6
STEP 4: Secure the Hard Drive in the Casing
This step is vital for the SATA Hard Drive to connect to the DVR.
• Use the 4 provided screws
• Positioning the Hard Drive into place
• Tighten the 4 screws on the bottom of the Casing
NOTE: Insure to use the correct screws. | Position Hard Drive and secure with | |||
provided screws | ||||
|
|
| ||
|
|
| ||
STEP 5: Slide the top Cover over the Cartridge Casing
•Slide the Cover forward over the Cartridge Case. Ensure it is secured in place over the release latch.
Release Latch
STEP 6: Reinsert the Cartridge Casing into the DVR
• Fully insert the Cartridge Case into the DVR.
NOTE: If the Cartridge Casing is not going all the way in, gantly adjust the angle of the cartridge Casing to help line it up to the connectors in the DVR.
Unlocked
STEP 7: Lock the Cabinet
Lock the cabinet by turning the key clockwise.
Locked
NOTE:
If you do not lock the cabinet, the system will NOT DETECT THE HARD DRIVE and will not function properly. Refer to the Side Panel (Removable Hard Drive Cartridge) on page 12 for lock location.
52
