Monte Carlo Fan Company 5AYR54 Series owner manual Tighten all 3 screws securely

19

Take plate with glass and place over the 2 screws and twist to hold in place. Replace screw removed.

22

The screws, washers and motor pads are pre-installed to the blade holders. Attach blade assembly to motor and tighten screws securely.

25

Plug white wire from fan to white wire from light kit. Then plug black wire from fan to black wire from light kit.

28

Install glass bowl using the rubber washer and nut provided.

20

Tighten all 3 screws securely.

23

FOR LIGHT KIT INSTALL SKIP THIS STEP. Attach center cover plate by screwing into center of fan

26

Place light kit over screws and twist to lock into place. Tighten 3 screws securely.

29

Place the finial cap on and twist to tighten.

21

Attach blade arms to blades using the blade arm screws and washers provided.

24

Loosen 2 screws and remove 1 screw to allow bottom fan plate to be installed.

27

Install 3x 40 watt candelabra base bulbs. (included)

30

Remove cover by snaping off from top or bot- tom. Remove battery cover. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.Attach cover of remote by placing over buttons and snap the battery cover in place.