Monte Carlo Fan Company 5EG60XX Series owner manual House Fan

7		8	House	Fan
		Black		Blue
				Black
		White
				White
		Ground		Green
		Connect black and blue wire from fan to Black or (Hot)
	Hang fan from hook on the mounting	wire from house. Connect White wire from Fan to
	plate. Use the closed hole. This will	White (Neutral) wire from house. Connect Ground
	allow for hands free wiring.	lead from house. Refer to Safety Tips section of
		leads from mounting bracket and downrod to Ground
		manual.
	10	11

Make wire connections to power source using wire nuts
provided. Make sure that no filiments are outside of
the wirenut. After making the wire connections, the		Carefully lift fan to loosened screws
wires should be spread apart with the grounded con-
ductor and the equipment-grounding conductor on one		on mounting plate and twist clock-
side of the outlet box and ungrounded conductor on		wise till tight..
the other side of the outlet box.
	13
		14

Snap plastic covers in place to cover
screws.		Install 3 screws and washers per
		blade and tighten securely. Repeat
		for all 5 blades
	16	17

Loosen 2 screws and remove 1 screw	Install light pan by twisting pan with
from motor plate and save screw.	key hole slots into place. Replace
	screw removed and tighten the 3
	screws securely.

9

Fan Switch

Light Switch

Wall

Control

For control of fan and optional light from wall location, follow diagram above. NOTE: A profes- sional electrician is recommended for this type of installation.

12

Replace 1 screw removed and tighten the 4 screws securely.

15

Check the motor for shipping stabilizers and remove if present. The screws, washers, and motor pads are pre-installed to the blade holders. Attach blade assembly to motor and tighten screws securely.

18

Remove 4 screws around light plate. Save screws.