31
Twist lower cover plate into place by twisting in direction of arrow. Replace 1 screw removed and tighten all 3 screws securely.
34
Place light kit over screws and twist direction of arrow into place. Then tighten all 3 screws securely.
32
Loosen 3 screw on light plate as shown.
35
Install 3 x 40 watt incandescent can- delabra bulbs. Bulbs not included.
33
Plug white wire from fan to white wire from light kit. Then plug black wire from fan to black wire from light kit.
36
Install glass onto light kit, install rubber washer and hex nut to hold in place and tighten in direction of arrow.
37
Install finial cap and tighten in direc- tion of arrow.
33WALL MOUNT INSTALL
Install wall control unit to outlet box using machine screws provided.
31
Remove cover by snaping off from top or bot- tom. Remove battery cover. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.Attach cover of remote by plac- ing over buttons and snap the battery cover in place.
34
Attach front cover to wall control with screws provided. Snap battery cover in place.
32HAND HELD INSTALL
Place face plate over battery compartment and buttons. Place remote over 2 pins on front cover. Attach cover of remote by placing over 4 pins and snaping into place.
