31
Install the 3 x 40 watt incandescent candelabra bulbs.
34
Remove cover by snapping off from top or bottom. Install 12V battery into wall remote. Duracell MN21/Eveready A23/GP 23A all 12V
37
Attach front cover to wall control with screws provided.
32
Place glass and cage on light kit, install rubber washer and hex nut to hold in place and tighten in direction of arrow.
35
Attach cover of remote by placing over buttons and snapping into place.
38 |
|
Fan speed | Light dimmer |
control | |
buttons | for lights |
Fan on / off |
|
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim lights press and hold button. To turn off light press and quickly release button.
33
Install finial cap nut and tighten in direction of arrow.
36
Install wall control unit to outlet box using machine screws provided.
39
Reverse function for this fan is a switch on top housing of the fan body. Turn fan off and flip switch, this will reverse the direction of the blades.
